Abstract:Composite mechanical joints are extensively used and becoming crucial components for primary and secondary structures in industry. Considerable efforts have been contributed to the failure behavior of resin matrix laminate composite bolt joint, but few ones refer to carbon matrix woven composites. In current work, a comprehensive experimental and numerical research on the failure behavior for satin woven carbon/carbon composites under pin-loading, which is the typical loading case for mechanical joint, was presented. Seven types of specimens with different configuration were tested to evaluate the influence of the geometry on the failure modes. The testing results stated that, with the increasing of width-to-hole diameter ratio (W/D) and edge distance-to-hole diameter ratio (E/D), the net tension and shear out failure transformed into the bearing failure respectively, while hole diameter-to-thickness ratio (D/t) hardly affect the failure mode. For a further exploration for damage mechanism of the acceptable bearing failure in engineering, damage accumulation and evolution were assessed combining numerical simulation and acoustic emission monitoring. In view of the complexity of satin woven framework, the hierarchical multiscale numerical strategy from micro-to macro-level was proposed to obtain the material mechanical performance. In order to acquire reliable prediction and consider the effects of the uncertainty sources on composite properties, the model geometry reconstruction was performed using X-ray tomography. Meanwhile, the fiber and void random distributions were determined via the Random Sequential Adsorption algorithm. The Murakami-Ohno damage theory was adopted to characterize the damage propagation. It is concluded that, the numerical prediction agreed with the testing results reasonably well, and the main damage mechanism during the bearing failure included matrix cracking, yarns pulling-out and yarns fracture matching various amplitude ranges of acoustic emission signals.

The experiment and numerical simulation of woven composite fastener shear behavior

Prediction of Shear Strength for 3D Braided Composite Fastener

Damage Model for Predicting Shear Strength of Carbon/carbon Composite Fastener Based on Post-Failure Behavior

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Damage analysis of shear pre-deformed 3D angle-interlock woven composites using experiment and non-orthogonal finite element model

Strength Analyses of Three-dimensional Five-directional Braided Composites Lug

Modeling the transverse tensile and compressive failure behavior of triaxially braided composites

A multi-scale finite element method for failure analysis of three-dimensional braided composite structures

Multi-scale Progressive Failure Simulation of 3D Woven Composites under Uniaxial Tension

The Experiment and Numerical Simulation of Composite Countersunk-head Fasteners Pull-through Mechanical Behavior

Failure Analysis of 3D Woven Composites under Tension Based on Realistic Model

A new simulation method for characterizing the shear behavior of needled carbon fiber composites

A Finite Element Model for Failure Analysis of 3D Braided Composites

Experimental Method and Failure Mechanisms Investigation for Out-of-plane Shear Fatigue Behavior of 3D Woven Composites

Meso-Scale Damage Simulation of 3D Braided Composites under Quasi-Static Axial Tension

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

Experimental and Numerical Analyses of the Mechanical Behaviors of Three-Dimensional Orthogonal Woven Composites under Compressive Loadings with Different Strain Rates

Experimental investigation on shear damage evolution of 3D woven composites using in situ computed tomography and multi-scale digital image correlation

Numerical investigation on the mechanical behaviors of 2D woven composites under complex in-plane stress states

Mechanical Behavior Analysis of 3D Braided Composite Joint Via Experiment and Multiscale Finite Element Method