Abstract:Dynamic characterization of textile composites is confronted with great challenges due to its large unit-cell size and the inherent limitations in specimen size for the Hopkinson bar-based test system. The small specimen size will inevitably introduce variations in effective mechanical response and failure mechanism, and bring about additional problems in determining the realistic dynamic properties of the material. This work experimentally investigated the dynamic compression behavior of three-dimensional angle interlock woven composite (3DWC) using the split Hopkinson pressure bar (SHPB). Specimens with different sizes were designed to explore the size dependency, strain-rate dependency and orientation dependency for the compressive behavior of the 3DWC. A high-speed camera and an optical microscope were introduced to elaborate on the damage progressing process and fracture morphology under diff0erent loading conditions. With an increase in strain rate, the measured strength of warp-direction specimens increased by approximately 7%, 6%, and 2.4% for three different sizes of specimens, accompanied by more severe intra-tow damage. Different-sized dynamic specimens exhibited comparable failure processes but modest variations in measured properties. When the number of unit cells in a specimen increased from two to three and four, the strength was observed to rise by around 21% and 26.3% respectively. In comparison to the warp-direction specimen, the weft-direction specimens exhibited substantially higher strength and failure strain, as well as distinct dominant failure modes of yarns. This work provides valuable insights into the determination of dynamic properties for 3D woven composites, and the designing and interpretation of dynamic test methods.

Experimental and Numerical Analyses of the Mechanical Behaviors of Three-Dimensional Orthogonal Woven Composites under Compressive Loadings with Different Strain Rates

Progressive failure analysis of 2D woven composites at the meso-micro scale

Numerical modeling of the mechanical response of basalt plain woven composites under high strain rate compression

Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

Multiscale numerical investigation on failure behaviour of three-dimensional orthogonal woven carbon/carbon composites subjected to pin-loading

Size-dependent mechanical behaviors of 3D woven composite under high strain-rate compression loads

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Numerical and Experimental Investigation on Mechanical Responses of Plain Woven CFRP Composite under Various Loading Cases

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Multi-directional compression behaviors and failure mechanisms of 3D orthogonal woven composites: Parametric modeling and strength prediction

Off-axial Angle Sensitivity of 3D Orthogonal Woven Composite Failure Behavior Subjected to In-Plane Compressive Loading

Investigation of parameterized braiding parameters and loading directions on compressive behavior and failure mechanism of 3D four-directional braided composites

Non-orthogonal FE model with stress smoothing for progressive damage analysis of shear pre-deformed 3D angle-interlock woven composites under compression

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

Axial Compression Experiments and Finite Element Analysis of Basalt Fiber/Epoxy Resin Three-Dimensional Tubular Woven Composites

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle