Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

A new simulation method for characterizing the shear behavior of needled carbon fiber composites

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Experimental And Numerical Investigations Of The Interlaminar Shear Properties Of Carbon/Carbon Composites

Study on Interlaminar Shear and Damage Behavior of Carbon Fiber Composites with Short Fiber Interleaves: 2. Micro-Mechanical Simulation

Simulation of Fiber Reinforced Composite Materials Mold Filling Process and Mechanical Properties Analysis

Numerical Simulation on Mechanical Properties and Damage Behavior of CFRP with Self-Healing Microvascular Channels

Shear nonlinear constitutive relationship of needled C/C-SiC composite

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Micromechanical Modelling and Simulation of Unidirectional Fibre-Reinforced Composite under Shear Loading

Micromechanical Modeling of Longitudinal Tensile Behavior and Failure Mechanism of Unidirectional Carbon Fiber/aluminum Composites Involving Fiber Strength Dispersion

Multi-scale modeling and tensile failure prediction of 3D needled C/C-SiC composites considering real microstructure

Simulation of failure behavior of 2.5D SiC/SiC variable thickness dovetail joint structures based on mesoscale model

On the meso-mechanical modeling method for textile composites

Damage Model for Predicting Shear Strength of Carbon/carbon Composite Fastener Based on Post-Failure Behavior

The experiment and numerical simulation of woven composite fastener shear behavior

A novel micromechanical model for predicting the shear properties of multilayer Ti3C2Tx MXene/carbon fiber fabric/epoxy composite

Modeling of Nonlinear Mechanical Behavior for 3d Needled C/C-Sic Composites under Tensile Load

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

A novel method for the characterization of through-thickness shear constitutive behavior of composites

Modeling the transverse tensile and compressive failure behavior of triaxially braided composites