Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Discontinuous-long-fibre (DLF) composites fabricated from pre-impregnated unidirectional (UD) fibre chips are susceptible to structural deficiency. The in-plane highly anisotropic mechanical properties of the chips combined with the random nature of fibre orientation causes local weaknesses within the material when fibres are perpendicular to the load. Recent experimental results have shown that using woven-fibre chips could improve the performance of DLF composites by increasing their average mechanical properties and reducing their variability. To better understand the underlying phenomenon giving an advantage to the woven chips, a finite element model was developed to predict the mechanical properties obtained from a standard tensile test. DLF chips were modelled based on a voxel method where random chip positions were generated by an algorithm developed in this work. ANSYS® software was utilized to model the non-linear response associated with progressive damage of the composite. The maximum stress and the Puck failure criteria were employed to define damage initiation for the woven and UD fibres, respectively. Tensile modulus predictions for both types of chips showed good results when compared to experimental data. Strength predictions for the UD fibres also showed good correlation with experimental results, but the model overestimated the strength of the woven-fibre DLF composite. It appeared that the failure of the UD-fibre composites was associated with matrix failure (transverse tension and in-plane shear). Woven-fibre composites, however, showed damage modes linked to both fibre failure (longitudinal tension) and matrix failure (transverse tension and in-plane shear).

Multi-scale Progressive Failure Simulation of 3D Woven Composites under Uniaxial Tension

Progressive failure analysis of 2D woven composites at the meso-micro scale

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution

A novel mesoscopic progressive damage model for 3D angle-interlock woven composites

Micromechanics-based Multiscale Progressive Failure Simulation of 3D Woven Composites under Compressive Loading with Minimal Material Parameters

A Progressive Damage Model For 3d Woven Composites Under Compression

Failure Analysis of 3D Woven Composites under Tension Based on Realistic Model

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

Multiscale Progressive Damage Model for Plain Woven Composites

Progressive Damage Investigation of 2.5D Woven Composites under Quasi-Static Tension

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

A Continuum Damage Model for Three-Dimensional Woven Composites and Finite Element Implementation

A Multiscale Method Across Three Length Scales for Progressive Damage Analysis of Plain Woven Composites

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

A Multi-Scale Stochastic Fracture Model for Characterizing the Tensile Behavior of 2D Woven Composites

Progressive Damage and Failure Analysis of Three-Dimensional Braided Composites under Multiaxial Loadings