Abstract:In this study, a detailed predictive numerical modeling technique is developed for three different kinds of hybrid and non-hybrid architectures of 3D woven orthogonal composites. A unit cell, full finite element meso model, is developed to simulate the elastic and damage progression behavior under uni-axial compression. Material systems for 3D woven Composites used in this study are Carbon/epoxy, Kevlar epoxy, and Hybrid formulation. The geometry of the constituents of the unit cell, fiber tows, and matrix, was determined through the microscopic analysis of the woven structures. The unit cell model used an idealized geometry without incorporating the fiber undulation which is a pervasive effect during the weaving process of 3D woven composites. Abaqus standard solver and a UMAT code incorporating the damage model within Abaqus was used to compute the deformation of the unit cell under in-plane compression loading. Moreover, determining the effect of void contents on the mechanical properties of the material, Balshin’s empirical equation was used to calibrate the input material parameters. The results from the numerical analysis are then compared with the experimental results and it is found that the predicted elastic modulus and compressive strength for all three types of architecture are in good agreement with the experimental results. Overall, the unit cell meso model furnished fairly accurate estimation of the compressive properties of 3D woven composites for different material systems with consideration of void contents.

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Progressive failure analysis of 2D woven composites at the meso-micro scale

Multi-scale Progressive Failure Simulation of 3D Woven Composites under Uniaxial Tension

Meso-Scale Damage Modeling of Hybrid 3D Woven Orthogonal Composites under Uni-Axial Compression

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Investigation on the Compressive Damage Mechanisms of 3D Woven Composites Considering Stochastic Fiber Initial Misalignment

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Multiscale numerical investigation on failure behaviour of three-dimensional orthogonal woven carbon/carbon composites subjected to pin-loading

A novel mesoscopic progressive damage model for 3D angle-interlock woven composites

Failure Analysis of 3D Woven Composites under Tension Based on Realistic Model

Multiscale Modeling of Mechanical Behavior and Failure Mechanism of 3D Angle-Interlock Woven Aluminum Composites Subjected to Warp/weft Directional Tension Loading

Progressive Damage Investigation of 2.5D Woven Composites under Quasi-Static Tension

Experimental investigation on shear damage evolution of 3D woven composites using in situ computed tomography and multi-scale digital image correlation

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution

Multiscale Damage and Low-Velocity Impact Study of Three-Dimensional Woven Composites

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

A Progressive Damage Model For 3d Woven Composites Under Compression

Modeling the transverse tensile and compressive failure behavior of triaxially braided composites

A Combined Experimental and Numerical Approach to Investigate the Failure Behaviors of 3D Woven Composites under Biaxial Tensile Loading

Numerical investigation on the mechanical behaviors of 2D woven composites under complex in-plane stress states

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis