Abstract:Alloying is known as an effective strategy to improve the mechanical properties of metallic materials. Here we show that the microstructure and mechanical behavior of a TiZrNbHf1.6 high entropy alloy film can be highly tuned by Ni addition. The newly designed TiZrNbHf1.6Nix (x = 0, 0.4, 1.2, 1.8, 2.5, 3.0, 4.6) alloy films are synthesized by co-sputtering Ti, Zr, Nb, Hf and Ni elemental targets. The microstructure and mechanical behavior of the alloy films are investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and nano/micro-indentations. The microstructural analysis indicates that the TiZrNbHf1.6 film has a single body-centered cubic with columnar-nanograined structure. As Ni content increases to 0.4 or above, the films show a complete amorphous structure. Our theoretical analysis shows that the transition from the crystalline to the amorphous structure can be attributed to the large atomic radius difference and the change of the thermodynamic parameters (e.g., mixing entropy and mixing enthalpy) due to the Ni addition. Compared to the TiZrNbHf1.6 film with a hardness of 4.8 GPa, a hardness increase of 8–35% is achieved in the Ni-doped alloy films (5.2–6.5 GPa) as measured by nanoindentation. The elevated hardness may be attributed to the severe lattice distortion and the amorphous structure induced by the Ni addition. Furthermore, microindentation reveals a diversity of deformation behavior in those films with different Ni content. A homogeneous deformation (slight plastic pileup) occurred in the films with Ni content of 1.2 and 4.6, which is close to the deformation behavior of the crystal TiZrNbHf1.6 film. While the film with a Ni content of 1.8 exhibits a catastrophic cracking deformation. Finally, multiple shear banding dominates the deformation of these films with Ni content of 0.4, 2.5 and 3.0. Our findings demonstrate that ultrastrong and highly deformable amorphous high entropy alloy thin films can be developed by appropriate element addition, making them promising materials for corrosion and wear-resistant coatings.

Enhancement of High-Temperature Strength of Ni-Based Films by Addition of Nano-Multilayers and Incorporation of W

Enhancement of Hardness and Thermal Stability of W-doped Ni3Al Thin Films at Elevated Temperature

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Microstructure and Mechanical Properties of Sputter Deposited Ni/Ni3Al Multilayer Films at Elevated Temperature

Structure, mechanical properties and thermal stability of CrAlN/ZrO 2 nanomultilayers deposited by magnetron sputtering

Individual Layer Thickness Dependence of Microstructure and Mechanical Properties of Magnetron Sputtering Mo-W-Doped Ni/Ni3Al Multilayers

Structure and Property Optimization of Ni-containing AlCrSiN Coatings by Nano-Multilayer Construction

Enhanced Hardness Via Interface Alloying in Nanoscale Cu/Al Multilayers

Strengthening Mechanisms in NiTi(NbFe)/amorphous-CuZrAl Multilayered Thin Films

Mechanical Properties of Thermally Annealed Cu/Ni and Cu/Al Multilayer Thin Films: Solid Solution vs. Intermetallic Strengthening

Enhanced Micro/nano-Tribological Performance in Partially Crystallized 60niti Film

Nickel content-dependent microstructure and mechanical properties of TiZrNbHfNi high entropy alloy thin films

Synergistic Reinforcement of Cu–Ni–Al Films with Dual Nanostructure

Influence of W content on microstructure and surface morphology of hard Ni-W films fabricated by magnetron co-sputtering

The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni

High Thermal Stability of Nanostructured Al Mediated by Heterophase Interfaces and Nanotwinning

Thermal Stability and Hardening Behavior in Superelastic Ni-rich Nitinol Alloys with Al Addition

Ultra-strong and ductile amorphous-crystalline Ti-Zr-Hf-Nb-Ta/Co-Ni-V nanolaminate thin films

Effect of Microalloying Addition on Microstructure and Mechanical Properties of Ni-W Coatings

Thermal Stability, Grain Growth and Structure Changes of Mechanically Alloyed W–Ni–Fe Composite During Annealing

Reaction Synthesis of Ni/Ni3Al Multilayer Composites Using Ni and Al Foils: High-temperature Tensile Properties and Deformation Behaviour