Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Thermal Stability, Grain Growth and Structure Changes of Mechanically Alloyed W–Ni–Fe Composite During Annealing

Effect of Annealing on the Microstructure and Magnetic Properties of Fe-based Nanocomposite Materials

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructure Evolution and Mechanical Properties of NiAlCrFeMo High Entropy Superalloy after Different Annealing Treatment

Comparative study of the microstructure and phase evolution of FeCoCrNiAl high-entropy alloy-matrix WC nanocomposite powders prepared by mechanical alloying

Microstructural evolution and thermal stability in a nanocrystalline lightweight TiAlV0.5CrMo refractory high-entropy alloy synthesized by mechanical alloying

Effects of annealing at 800 and 1000 °C on phase precipitates and hardness of Al7Cr20Fe Ni73− alloys

Avoiding microstructural instabilities in high tungsten containing superalloys by adjusting Al content

Effect of annealing temperature on carbide precipitation, microstructure and mechanical properties of Fe-Mn-C- (Cr, Mo, W, Ni, Nb, Ti, V) multi-alloying TWIP steel

Structural and thermal properties of the Fe-based alloys prepared by mechanical milling

Phase, Microstructure and Properties Evolution of Fine-Grained W–Mo–Ni–Fe Alloy During Spark Plasma Sintering

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys

Microstructure Evolution and Microhardness of AlxNi2−xCoCrFe Alloys After Long-Time Annealing

Microstructure and mechanical properties of liquid–phase sintered W@NiFe composite powders

Microstructural Stability of Gas-Atomized Al-Based Nanophase Composites.

Structural Transition of Fe80Cu20 Alloy Induced by Annealing

Microstructural evolution during annealing of a powder metallurgical TiAl–Nb composite and its effect on mechanical properties

Mechanical alloying of ODS tungsten heavy alloys and microstructure development of intermetallic compounds

Thermal stability of the multicomponent nanocrystalline Ni–ZrNbMoTa alloy