Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Conceptual and Feasibility Study on Lab-Scale Series Power Generation by Carbon-Air and Conventional Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Co-Generation of Electricity and Chemicals via Solid Oxide Fuel Cells Using Li-Doped LSGM and LSF Composite Anodes

Clean and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Gas by Solid Oxide Fuel Cells with an Additional Reforming Layer

Modeling of Direct Carbon Solid Oxide Fuel Cell for CO and Electricity Cogeneration

Biomass Carbon Fueled Tubular Solid Oxide Fuel Cells with Molten Antimony Anode

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

High Performance Tubular Solid Oxide Fuel Cells With Bscf Cathode

Tubular direct carbon solid oxide fuel cells with molten antimony anode and refueling feasibility

The Optimal Design of Solid Oxide and Molten Carbonate Fuel Cells Integration with a CO2 Recycling Unit: an Attempt to Reach a Clean Transition Process

An efficient and durable solid oxide fuel cell integrated with coal gasification system

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Cell-protecting Regeneration from Anode Carbon Deposition Using in Situ Produced Oxygen and Steam: A Combined Experimental and Theoretical Study

Conversion of CO 2 through solid oxide co-electrolysis cell with cobalt-free fuel electrode

A Direct Flame Solid Oxide Fuel Cell for Potential Combined Heat and Power Generation

Coal Gasification Based Solid Oxide Fuel Cell Power Generation with CO2 Capture

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Development of catalytic combustion and CO2 capture and conversion technology

A carbon-air battery for high power generation

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network