Abstract:China's total carbon emissions are approximately 11 billion tons,with around 40%of CO2 being produced by the coal-fired power plants(CFPP).Therefore,reducing carbon emissions from the CFPP is critical in achieving the Dual-Carbon target.This paper focused on the advancements in the low-carbon/carbon-neutral fuel substitution technologies(such as biomass,sludge,hydrogen/ammonia,etc.)and the CCUS(carbon capture,utilization and storage).The CFPP coupled with biomass includes direct and indirect coupling,but are subject to the supply and price of biomass feedstock.To address these challenges,a comprehensive"planting-harvesting-transportation-storage-pretreatment-combustion"ap-proach was recommended to ensure an effective control throughout the entire chain.Initial pilot test on a 660 MW CFPP revealed a substantial reduction in CO2 emissions by 772500 tons annually.The high-water content of municipal sludge,reaching up to 80%,necessitates drying prior to entering the boiler.Current steam drying and flue gas drying technologies entail substantial investment and operational costs,with the dried sludge still retaining high water content and associated problems such as odor.Consequently,the blending ratio in the CFPP remains below 8%.A sludge carbonization techno-logy based on a biomass heat source can address these challenges,which allows for the direct production of odorless sludge char in sewage plants with a calorific value of about 10.26 MJ/kg.This technology enables an increased blending ratio in the CFPP to 20%-30%,thereby significantly reducing coal consumption and CO2 emissions.The blending of hy-drogen/ammonia necessitates addressing the issues of ammonia escape and NOx emission under high blending ratios.Ex-periments for co-firing of coal and ammonia were conducted on 300 MW and 600 MW CFPP in China to address the chal-lenges of ammonia escape and NOx emissions under high blending ratios.The results showed that combustion control can achieve a higher NH3 burn-up rate with a slight increase in NOx emissions.However,the commercialization of hydrogen/ammonia blending in the CFPP is constrained by the cost of hydrogen and ammonia.The commercialization of pre-combustion decarbonization technology,such as IGCC,faces significant limitations due to high costs.Several foreign demonstration projects were discontinued.The construction costs and equipment reliability are crucial for promoting the commercialization of this technology.Carbon capture technologies in combustion processes include oxygen-enriched combustion and chemical chain combustion.The power generation efficiency of atmospheric oxyfuel combustion is lower by 8%-12%compared to air combustion due to the energy consumption associated with air separation and recycling pro-cesses.Transitioning from atmospheric oxyfuel combustion to pressurized oxyfuel combustion can further increase the net power generation efficiency.Notably,China has constructed the world's largest 4 MW chemical-looping combustion(LCL)demonstration plant.The LCL also has a potential application in the gasification industry.Post-combustion carbon capture predominantly employs the solution absorption technology,while the solid adsorption technology offers a lower regeneration energy consumption.However,some challenges remain in reducing energy consumption and costs to facilit-ate the large-scale commercialization of this technology.

Development of catalytic combustion and CO2 capture and conversion technology

Current status of national integrated gasification fuel cell projects in China

Study on Pure Oxygen Exhaust Gas Combustion: Key Technology of CO2 Capture for High Temperature Fuel Cell With Coal Syngas

Coal Gasification Based Solid Oxide Fuel Cell Power Generation with CO2 Capture

Assessment of CO2 enrichment mechanism in integrated coal gasification fuel cell combined cycle system with carbon capture

Key CO2 capture technology of pure oxygen exhaust gas combustion for syngas-fueled high-temperature fuel cells

Development of new technology for coal gasification purification and research on the formation mechanism of pollutants

Fundamental and Technical Challenges for a Compatible Design Scheme of Oxyfuel Combustion Technology

Clean and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Gas by Solid Oxide Fuel Cells with an Additional Reforming Layer

Energy, exergy and economic(3E) analyses of a CO 2 near-zero-emission power generation system with integrated supercritical water gasification of coal and SOFC

Thermodynamic investigation of an integrated near-zero CO2 emission power generation system with SOFC, MGT, SCO2BC, and CO2 capture

Design and optimization of a solid oxide fuel cell-inverted gas turbine integrated system with zero carbon emission for distributed cogeneration

Concept Design, Parameter Analysis, and Thermodynamic Evaluation of a Novel Integrated Gasification Chemical-Looping Combustion Combined Cycle Power Generation System

Status of an MWth integrated gasification fuel cell power-generation system in China

Status of MWth Integrated Gasification Fuel Cell (IGFC) Power Generation System Demonstration in China

Enhanced conversion efficiency and coking resistance of solid oxide fuel cells with vertical-microchannel anode fueled in CO2 assisted low-concentration coal-bed methane

Conceptual and Feasibility Study on Lab-Scale Series Power Generation by Carbon-Air and Conventional Solid Oxide Fuel Cells

Progress in Low Carbon Technologies for Large-Scale Coal-Fired Power Plants

Prospect of carbon-based solid oxide fuel cells

A conceptual design of catalytic gasification fuel cell hybrid power plant with oxygen transfer membrane

Boiling coal in water: Hydrogen production and power generation system with zero net CO2 emission based on coal and supercritical water gasification