Abstract:Bearing shells are widely used in heavy-load friction pairs of high-end machines to reduce wear, thereby extending the lifetime of machines. Tribotests are necessary for bearing shells to evaluate their wear behaviors, reliability, and durability. Existing tribotests of bearing shells can mainly be categorized into two types: full-scale machine tests or local-scale standardized tests (pin-on-disk, etc.). The former has more realistic test configurations but is time/labor-consuming and expensive. Contrarily, the local-scale standardized tests are simple, low-cost, and flexible to use, but their oversimplified contact configurations make the measuring results in poor correlation with practical applications, easily misleading the screen of bearing shells. For that, this study develops a hybrid tribotest method and corresponding instrument (tribometer) to realistically measure the friction and wear of heavy-load bearing shells, which combines the advantages of the facticity of full-scale machine tests with the simplicity and inexpensive of local-scale standardized tests. In this method, a convenient round-arched concave on the bearing shell holder is designed to achieve the conformal contact friction of the bearing shells, of which the size can also be modifiable and compatible with different bearing shells. To reproduce the actual friction conditions in the machine, an easy-to-removal roller counterpart with an adjustable speed down to 0.5 r/min and a hydraulic loading with a controllable force exceeding 93 kN (equivalent to 9.3 ton) are employed to achieve the low speed and heavy load. Based on the method, both alloy- and polymer bearing shells are measured. The measuring results indicate the feasibility of the hybrid measurement method and tribometer. The proposed method offers a facile and actual way for screening structural/material, the wear mechanism analysis, and the contact configuration investigation of bearing shells.

Development of a Dynamical Load Testing Worktable for Porous Bearing

Development of a Testing Worktable for Testing the Tribology Performance and Working Capability of Porous Bearing

Worktable testing and testing accuracy analysis of tribology performance on porous bearings

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

Study on Bearing Behavior of Pure-friction Long Pile in Soft Clay

A Two-Disk Test Rig for Researching the Damage Behavior of Rolling/Sliding Contact Surfaces under Extreme Conditions

The Development of Bearing Fatigue Testing Machine

An experimental framework for determining wear in porous journal bearings operated in the mixed lubrication regime

Experimental Investigation of Tribological Behavior for FZ1460 Fe-Cu Porous Bearings

An Environment-based Design (EBD) Approach to Developing Bearings Tribo-test Machine: a Case Study

Hybrid Tribotest Method for Realistically Measuring Friction and Wear of Heavy-Load Bearing Shells

Tribological and Vibration Properties of Three Different Polymer Materials for Water-Lubricated Bearings

Preliminary Experimental Study on Static Loading Characteristics of Multi-Decked Protuberant Foil Thrust Bearing

A Mechanism Design of Friction and Wear Test Based on Liquid Medium

Design and development of a novel sliding friction and wear tester with complex working conditions

Design and its realization of tribological - Dynamic design database

DEVELOPMENT OF EXPERIMENT SYSTEM FOR SELF-LUBRICATED PLASTIC PLAIN BEARINGS

Design and Analysis of a Self-Lubricating Nuclear Joint Bearing above 320°C

Study on static performance of gas-lubricated thrust bearing based on multi-microporous stainless steel plate

Development of Tribo-tester for Tribological Studies of Piston Ring/Bore Pair

Design and Development of Novel Lubricant Free Transmission System for Manual Bone Drilling Machine