Abstract:Rolling bodies in cageless ball bearings without cage control will always hit each other. This causes the rolling bodies to wear out faster and decreases the bearing's performance. But most of the available references only look at how well the bearing works when the cage is in place. They do not look at how the inner ring's dynamic response changes when the cage is removed and the rolling elements' motion changes. On the basis of this, a nonlinear rolling-body dynamics model with six degrees of freedom and contact between rolling bodies is suggested. The dynamics model of an automatic discrete system is built on the motion coupling and functional slot discrete theories. The power hardware re-turn method is used to figure out how to solve the dynamics model. The results show that after the rotor falls into the inner ring, the rolling bodies will cause cumulative collision for a short time. Then, because of the function slot, the occasional collision between the rolling bodies would not cause cumulative collision again, and the inner ring motion will be more stable. When the speed of the rotor's fall goes up, the rolling bodies hit each other more often. This makes the inner ring move more steadily, but there is a limit. To make sure that the theoretical analysis and the results of the theoretical solution are right, a high-speed camera was used. To make sure that the theoretical analysis and the results of the theoretical solution are right, we built a bearing test platform to take pictures of the rolling body of the bearing as it moved. The image processing program is used to figure out the rolling body's angular speed, compare the test results to the theoretical study and make sure that the theoretical study is right. The theoretical study is compared to the test results to see if the theoretical study is right.

Study on Dynamics of Rolling Bearings

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Dynamic Characteristic Analysis of High-speed Spherical Ball Bearing

Study on Dynamics of Micro Gas Journal Bearing--rotor System

Lubrication and stability analysis of nonlinear rotor-bearing system

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Research on multi-body dynamic model of automatic discrete system for protection bearing without cage

Dynamic modeling and abnormal contact analysis of rolling ball bearings with double half-inner rings

Numerical and experimental investigation on ball motion with oil rheology and thermal effect in high speed ball bearings

Dynamic characteristics analysis of an elliptical bearing-rotor coupled system

Structures Dynamic Property Analysis of Elastic Composite Cylindrical Rolling Element

Investigation on Dynamic Characteristics of High Speed Bearing Cage

Dynamic Analysis of the Bearing-Rotor System with the Variation of Cage's Pocket Hole Diameter

An improved planar dynamic model for vibration analysis of a cylindrical roller bearing

Dynamic modeling and characteristics analysis of cylindrical roller bearing with the surface texture on raceways

Multibody contact dynamics on mechanisms with deep groove ball bearing joints

Study of Non-Smooth Symmetry Collision of Rolling Bodies of Localized Functional-Slot Cage-Less Ball Bearings Considering Lubrication Flow

Nonlinear dynamic model of ball bearings with elastohydrodynamic lubrication and cage whirl motion, influences of structural sizes, and materials of cage

A comprehensive study on dynamic performance of ball bearing considering bearing deformations and ball-inner raceway separation

Interaction mechanisms between cage whirl motion, sliding of balls and vibration of bearing rings for angular contact ball bearings at various groove bottom circle diameters

Dynamic modeling and force-vibration mapping mechanism construction of rolling bearings considering cage flexibility and local faults