Abstract:The vibration responses of cylindrical roller bearings can be affected by the surface texture on raceways, which includes surface waviness and roughness. Thus, it is very important to develop a dynamic model which can describe the surface texture comprehensively and simulate vibration responses of bearings accurately at high rotating speed. In this paper, a complex dynamic model of cylindrical roller bearings with consideration of surface texture is developed. The developed model is verified by simulations and experiments about the relationship between wave numbers and vibration responses. Based on the developed model, several dynamic characteristics of roller bearings are discussed: a) the influence of radial clearance and rotation speed on the stability of cage; b) the contact between a roller and raceways; c) the variation of rotation angular speed of roller. Results show that with the radial clearance increase, the stability of cage rise first and decrease. The cage stability is also affected by the rotation speed of inner raceway. The constitution of contact force between a roller and raceway are different between loaded zone and unloaded zone. Changes of angular rotation velocity of roller also have some regulations.
What problem does this paper attempt to address?
This paper aims to solve the problem of vibration response of roller bearings under high - speed rotation conditions, especially how these surface features affect the dynamic characteristics of the bearings when there are textures (including surface waviness and roughness) on the raceway surfaces. Specifically, the paper attempts to accurately understand the vibration characteristics of bearings with surface textures by developing a complex dynamic model to describe surface textures and simulating the vibration response of roller bearings under high - speed rotation conditions. This not only helps to improve the healthy and efficient operation of the system but also provides guidance for the design and fault diagnosis of bearings.
To achieve this goal, the author first developed a complex dynamic model considering surface textures and verified the correctness of the model through simulation and experiments. Based on this model, the paper further explored the following dynamic characteristics:
1. **The influence of radial clearance and rotational speed on cage stability**: It was found that as the radial clearance increases, the stability of the cage first increases and then decreases. In addition, the rotational speed of the inner ring also affects the stability of the cage.
2. **Contact characteristics between rollers and raceways**: The contact forces and their components between rollers and raceways in the load zone and non - load zone were analyzed. The results showed that in the load zone, the contact forces between rollers and both inner and outer raceways are significant, while in the non - load zone, rollers mainly contact the outer raceway and the contact force is significantly smaller than that in the load zone.
3. **The variation law of the rotational angular velocity of rollers**: The variation of the rotational angular velocity of rollers in different zones was studied. It was found that in the load zone, the rotational angular velocity of rollers fluctuates frequently, while in the non - load zone, the rotational angular velocity gradually decreases.
Through these studies, the paper reached the following conclusions:
- The shape of surface waviness has a great influence on the vibration response of bearings. If the wave number of surface waviness is n times the number of rollers, then the n - th harmonic of the roller passing frequency of the outer raceway will become significant in the envelope spectrum of the vibration acceleration response.
- Selecting a reasonable radial clearance is an important step in bearing design. As the radial clearance increases from 0 to 50 micrometers, the stability of the cage first increases and then decreases, and the model can help design the radial clearance of bearings from the perspective of cage running stability.
- The performance of bearings at different rotational speeds is different. At low rotational speeds, the cage moves within a small range without whirling; as the rotational speed increases, the cage begins to whirl and its stability will increase as the rotational speed continues to increase.
- The contact force between rollers and raceways is more significant in the load zone than in the non - load zone. By studying the composition of the contact force between rollers and the outer raceway, it was found that there are extrusion force and impact force in the load zone, while in the non - load zone, the extrusion force can be ignored.
- The rotational angular velocity of rollers experiences severe fluctuations in the load zone.
These research results provide important theoretical basis and technical support for the design and fault diagnosis of roller bearings.