Abstract:In order to investigate the influence of surface micro-texture on the oil film carrying capacity, a theoretical model of dynamic pressure lubrication is constructed based on CFD, and dynamic pressure lubrication simulation and friction and wear experimental research are used to analyse the influence of speed and load on the friction behaviour of the bearing pair, and the wear performance of the specimen is evaluated by means of the surface morphology and friction coefficient. The results show that the carrying capacity of the oil film on the textured surface is relatively large compared with that of the non-textured surface, showing regular fluctuations, and that the pressure values of turbulent flow are greater than those of laminar flow. As the rotational speed increases, the cavitation effect becomes more and more obvious, and the carrying capacity of the oil film increases. The smaller the thickness of the surface oil film, the higher the load carrying capacity and the lower the degree of wear; The surfaces of the textured specimens showed the best friction reduction and anti-wear properties, followed by the smooth surfaces and the worst rough surfaces. With the increase of rotational speed, the friction coefficient tends to decrease. When the rotational speed is 0.4 m/s, the wear of the textured surface is reduced. With the increase of load, the thickness of the formed oil film decreases, the friction coefficient decreases, and the anti-friction effect of the textured surface increases. This indicates that the surface texure treatment of 304 stainless steel, and the selection of appropriate working condition parameters can effectively reduce wear during the friction process, and improve the wear resistance of bearings.

Study on static performance of gas-lubricated thrust bearing based on multi-microporous stainless steel plate

Research on the Influence of Different Surface Machining States on the Inclination of the Porous Gas Bearing

Preliminary Experimental Study on Static Loading Characteristics of Multi-Decked Protuberant Foil Thrust Bearing

Evaluation of the performance characteristics of double-layered porous micropolar fluid lubricated journal bearing

Research On Static And Dynamic Characteristics Of Gas-Lubricated Microbearings For Microfluidic Devices

Contact and Tribological Study of Micro/Nano Groove Texture on the Surface of Gas Bearing Materials Based on Nanoscale

Simulation and Experimental on Thermal Behavior of Hydrostatic Thrust Bearing Based on Superhydrophobic/oleophobic Surface

Study of Externally Pressurized Air Thrust Bearings with Multi-Rows Supply Holes

Study on Static Characteristics of Gas Thrust Bearing with Freon in Heat Pump Compressor

Research on the Static Characteristics of Circular Thrust Porous Aerostatic Bearings

Static characteristics of a water-lubricated hydrostatic thrust bearing with a porous land region and a capillary restrictor

The Application Of Aerodynamic Plate-Foil Journal Bearing For Cryogenic Turboexpander

Experimental Study of Plate-Foil Journal Gas Bearings

Investigation into gas lubrication performance of porous gas bearing considering velocity slip boundary condition

3039 Static and Dynamic Characteristics of Surface-compensated Aerostatic Porous Thrust Bearings with 2^ Restrictor Inserting into an Air Feed Port

A study on improving friction and wear performance of bearing bush in radial piston hydraulic motor

Study on the wear performance of 304 stainless steel aerospace joint bearings

Analytical study of plate foil journal gas bearings

Influence of Temperature Effect on the Static and Dynamic Performance of Gas-Lubricated Microbearings

Study on the tribological performance of self-lubricating thrust ball bearings with different embedded features

Study on Static Characteristics of Annular Array Microporous Aerostatic Bearing