Abstract:Bearing shells are widely used in heavy-load friction pairs of high-end machines to reduce wear, thereby extending the lifetime of machines. Tribotests are necessary for bearing shells to evaluate their wear behaviors, reliability, and durability. Existing tribotests of bearing shells can mainly be categorized into two types: full-scale machine tests or local-scale standardized tests (pin-on-disk, etc.). The former has more realistic test configurations but is time/labor-consuming and expensive. Contrarily, the local-scale standardized tests are simple, low-cost, and flexible to use, but their oversimplified contact configurations make the measuring results in poor correlation with practical applications, easily misleading the screen of bearing shells. For that, this study develops a hybrid tribotest method and corresponding instrument (tribometer) to realistically measure the friction and wear of heavy-load bearing shells, which combines the advantages of the facticity of full-scale machine tests with the simplicity and inexpensive of local-scale standardized tests. In this method, a convenient round-arched concave on the bearing shell holder is designed to achieve the conformal contact friction of the bearing shells, of which the size can also be modifiable and compatible with different bearing shells. To reproduce the actual friction conditions in the machine, an easy-to-removal roller counterpart with an adjustable speed down to 0.5 r/min and a hydraulic loading with a controllable force exceeding 93 kN (equivalent to 9.3 ton) are employed to achieve the low speed and heavy load. Based on the method, both alloy- and polymer bearing shells are measured. The measuring results indicate the feasibility of the hybrid measurement method and tribometer. The proposed method offers a facile and actual way for screening structural/material, the wear mechanism analysis, and the contact configuration investigation of bearing shells.

Worktable testing and testing accuracy analysis of tribology performance on porous bearings

Development of a Testing Worktable for Testing the Tribology Performance and Working Capability of Porous Bearing

Development of a Dynamical Load Testing Worktable for Porous Bearing

Measurement and Technological Test on Grinding State Parameters of Bearing Ring Raceway

Experimental Investigation of Tribological Behavior for FZ1460 Fe-Cu Porous Bearings

Study on the Tribological Properties and Fault Mechanisms of Copper-Based Alloy Journal Bearing under Different Working Conditions

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

Comparative Study on Surface Contact Fatigue of Machine Tool Bearing Raceways with Different Rolling Elements: Two Failure Bearings Case Studies

Simulation and Experimental Study on Tribological Properties of Herringbone Texture on 42CrMo Bearing Alloy Steel Surface

An experimental framework for determining wear in porous journal bearings operated in the mixed lubrication regime

Analysis of the tribological and dynamic performance of textured bearings under contaminated conditions

Study on the tribological performance of self-lubricating thrust ball bearings with different embedded features

Tribological and Vibration Properties of Three Different Polymer Materials for Water-Lubricated Bearings

Multi-dimensional Research on Material and Processing Technology of Bearings under Multi-Working Conditions

Investigation on lubrication characteristics and deformation control of hydrostatic bearing workbench

Effects of Surface Texturing and Laminar Plasma Jet Surface Hardening on the Tribological Behaviors of GCr15 Bearing Steel

The Tribological Properties of Nano-Lubricants and Their Application on Bearings: Recent Research Progress

Hybrid Tribotest Method for Realistically Measuring Friction and Wear of Heavy-Load Bearing Shells

Structure–performance evolution mechanism of the wear failure process of coated spherical plain bearings

Journal Bearing Wear Monitoring via On-Line Visual Ferrography

Research on Improving the Tribological Properties of Bearings under Cryogenic Conditions