Abstract:In order to reduce process energy consumption and geometric error induced by thermal deformation simultaneously in sustainable wire electrode discharge machining(WEDM) process, this work applies a new micro crack wire electrode to enhance machine characteristic, and describes the reduction mechanism of above two critical factors compared with brass wire when machining thin-wall components. Firstly, a number of experiments are conducted to explore the effects trend of machining parameters on thermal deformation and material removal rate(MRR) by above two wire tools. The results indicate that micro crack wire can achieve a significant decrease by an average of 32.60% in MRR and 42.69% in thermal deformation compared with brass wire. And the best parameters combination for micro crack wire is pulse on time:13 mu s, pulse off time:8 mu s, wire speed:0.09 m/s, water pressure:1.1 MPa. The analysis of residual stress and discharge points distribution explains the improvement mechanism of micro crack wire by decreasing the magnitude of residual stress (33.14% on average) and non-uniformity of discharge points distribution (36.32% on average). Besides, the results of energy consumption and environmental effect demonstrate that micro crack wire can obviously reduce energy consumption by an average of 22.68% and debris pollution. Eventually, the analysis of surface topography, debris shape, micro structures, recast layer thickness and surface element composition are also performed. It can be concluded that the micro crack wire shows prominent superiority and potential for applications in the sustainable manufacturing field. (C) 2019 Elsevier Ltd. All rights reserved.

Wire electro-discharge grinding (WEDG) and its application

WEDG Technology and Its Applications in Micromachining

MWEDM Equipment and Its Application

Design of a Wire Transport System and Position Fluctuations of Discharge Area in Wire Electrode in WEDG

Gap status identification and control of wire electrochemical micromachining

Wire Electrochemical Machining with Monodirectional Traveling Wire

A study on wire electrochemical micromachining for fabrication of microgrooves

Development of Micro Wire Electrical Discharge Machining Platform and Its Application

��电极放电磨削（wedg）技术的研究与应用

Experimental Study of Micro-Electrode Array by Micro-Wedm

Machining of Cylindrical Parts by Wire Electrical Discharge Grinding Using Thin Plate Guide

Complex Rotary Structures Machined By Micro-Wedm

Investigation on a Novel Surface Microstructure Wire Electrode for Improving Machining Efficiency and Surface Quality in WEDM

Wire Electrochemical Machining with Pulsating Radial Electrolyte Supply and Preparation of Its Tube Electrode with Micro-Holes

Research on a Micro EDM Equipment and Its Application

Study on Technology of Block Electro-Discharge Grinding with Lower Working Voltage for Fabricating Micro Electrode

Fabrication of Tapered Micro Rods Using Twin Static Wire Electrical Discharge Grinding Process

High Spindle Speed Wire Electrical Discharge Grinding Using Electrostatic Induction Feeding Method

Analysis and Reduction of Process Energy Consumption and Thermal Deformation in a Micro-Structure Wire Electrode Electric Discharge Machining Thin-Wall Component

Research On Technology Of Wire Electrical Discharge Machining With A Rotator Wire Electrode

Micro Tool Electrode Fabrication Using Edge Electrode Discharge Grinding