Abstract:Complex profiles, comprising curved features and inclined surfaces, are an inherent attribute of tungsten carbide (WC-Co) tooling applications like dies, molds, and cutting tools. Such profiles are difficult to machine by conventional processes due to high hardness of WC-Co. Wire electric discharge machining (WEDM) is a frequently employed non-traditional machining process for producing intricate shapes and complex geometries in difficult-to-cut materials. However, this process offers its own challenges regarding machining accuracy of arced profiles such as undercutting or overcutting of material. Machining task becomes more complicated if arced profiles are to be machined at a certain taper angle. Keeping in view the stringent requirements of productivity and geometrical accuracy for WC-Co tooling, current research is focused on comprehensively evaluating the performance of WEDM process for producing complex tapered profiles in WC-Co composite. Furthermore, instead of using simple brass wire, a zinc-coated wire electrode is employed to enhance cutting rate. The impact of WEDM control variables namely, pulse-on/off time, servo voltage, and wire tension, in conjunction with workpiece taper, is studied on geometrical accuracy, cutting rate, and surface quality of complex tapered profile. Results of experimentation are analyzed using various statistical techniques. Scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) analysis are carried out for in-depth evaluation of machining results. Experimental results show that a complex tapered profile can be generated with as small as 0.16° angular error and 6-μm radial error using optimal parameter settings. Optimal settings of process parameters result into 33.3% reduction in angular error, 14.3% reduction in radial error, 12% increase in cutting speed, and 14.4% reduction in surface roughness of workpiece.

Fabrication of Tapered Micro Rods Using Twin Static Wire Electrical Discharge Grinding Process

Curved Profiles Machining of Ti6Al4V Alloy Through WEDM: Investigations on Geometrical Errors

Taper-drawing Fabrication of Glass Nanowires

Impact of Process Parameters on Forming Quality and Deposition Efficiency of Unsupported Rods in Wire Arc Additive Manufacturing

Research on Geometric Constraint Strategies for Controlling the Diameter of Micro−Shafts Manufactured via Wire Electric Discharge Grinding

Concept development for fabricating threaded micro-pin using wire-EDM

Analysis and Reduction of Process Energy Consumption and Thermal Deformation in a Micro-Structure Wire Electrode Electric Discharge Machining Thin-Wall Component

Grinding the sharp tip in thin NiTi and stainless steel wires

A study on wire electrochemical micromachining for fabrication of microgrooves

Helical Surface Creation by Wire Electrical Discharge Machining for Micro Tools

Study on the Preparation Process for High Accuracy Micro Machining by Wire Electrical Discharge Machining

Enhanced Tensile Ductility of Tungsten Microwires Via High-Density Dislocations and Reduced Grain Boundaries

Tailoring material microstructure and property in wire-laser directed energy deposition through a wiggle deposition strategy

Online Measurement by Intersecting-point Electric Contact and Combined Fabrication Process for Micro Tool Electrodes

Complex taper profile machining of WC-Co composite using wire electric discharge process: analysis of geometrical accuracy, cutting rate, and surface quality

Precision EDM of Micron-Scale Diameter Hole Array Using in-Process Wire Electro-Discharge Grinding High-Aspect-Ratio Microelectrodes

Thermo-mechanical analysis and optimal tension control of micro wire electrode

A High-Precision Constant Wire Tension Control System for Improving Workpiece Surface Quality and Geometric Accuracy in WEDM

Experimental investigation on WEDG machining parameters for tungsten carbide

A Novel Strategy to Fabricate Thin 316L Stainless Steel Rods by Continuous Directed Energy Deposition in Z Direction

Wire Electrochemical Machining with Pulsating Radial Electrolyte Supply and Preparation of Its Tube Electrode with Micro-Holes