Abstract:In order to reduce process energy consumption and geometric error induced by thermal deformation simultaneously in sustainable wire electrode discharge machining(WEDM) process, this work applies a new micro crack wire electrode to enhance machine characteristic, and describes the reduction mechanism of above two critical factors compared with brass wire when machining thin-wall components. Firstly, a number of experiments are conducted to explore the effects trend of machining parameters on thermal deformation and material removal rate(MRR) by above two wire tools. The results indicate that micro crack wire can achieve a significant decrease by an average of 32.60% in MRR and 42.69% in thermal deformation compared with brass wire. And the best parameters combination for micro crack wire is pulse on time:13 mu s, pulse off time:8 mu s, wire speed:0.09 m/s, water pressure:1.1 MPa. The analysis of residual stress and discharge points distribution explains the improvement mechanism of micro crack wire by decreasing the magnitude of residual stress (33.14% on average) and non-uniformity of discharge points distribution (36.32% on average). Besides, the results of energy consumption and environmental effect demonstrate that micro crack wire can obviously reduce energy consumption by an average of 22.68% and debris pollution. Eventually, the analysis of surface topography, debris shape, micro structures, recast layer thickness and surface element composition are also performed. It can be concluded that the micro crack wire shows prominent superiority and potential for applications in the sustainable manufacturing field. (C) 2019 Elsevier Ltd. All rights reserved.

Thermo-mechanical analysis and optimal tension control of micro wire electrode

Optimal Tension Control of Micro Wire Electrode

Gap status identification and control of wire electrochemical micromachining

A High-Precision Constant Wire Tension Control System for Improving Workpiece Surface Quality and Geometric Accuracy in WEDM

Three-dimensional characteristics analysis of the wire-tool vibration considering spatial temperature field and electromagnetic field in WEDM

Analysis and Reduction of Process Energy Consumption and Thermal Deformation in a Micro-Structure Wire Electrode Electric Discharge Machining Thin-Wall Component

A Macroscopic Mechanical Model of Wire Electrode Deflection Considering Temperature Increment in MS-WEDM Process

Study on the Preparation Process for High Accuracy Micro Machining by Wire Electrical Discharge Machining

A study on wire electrochemical micromachining for fabrication of microgrooves

Research on Geometric Constraint Strategies for Controlling the Diameter of Micro−Shafts Manufactured via Wire Electric Discharge Grinding

3D Transient Thermal Analysis of Wire Electrode under Consecutive Discharges

Modeling and Simulation of Wire Electrode Deflection in WEDM

Experimental Determination of Convective Heat Transfer Coefficient in WEDM

Measurement of Wire Electrode Temperature in WEDM

Investigation on a Novel Surface Microstructure Wire Electrode for Improving Machining Efficiency and Surface Quality in WEDM

Process parameter modeling and multi-response optimization of wire electrical discharge machining NiTi shape memory alloy

An Analysis and Optimization of the Geometrical Inaccuracy in WEDM Rough Corner Cutting

Simulation on Influence of Electrostatic Force on Machining Characteristics in WEDM

Optimization of Wire Electric Discharge Machining (WEDM) Process Parameters for AISI 1045 Medium Carbon Steel Using Taguchi Design of Experiments

Evaluation of Wire Electrical Discharge Machining Performance Features on EN AW-6082 T6 Aluminum Alloy and Optimization of Machining Characteristics

Optimization of Cutting Conditions of YG15 on Finish Cutting in WEDM Based on Taguchi Method