Abstract:The planar electromagnetic interference(EMI) filters have a good application prospect in aviation for the advantages of easy magnetic integration,small parasitic parameters and strong anti-EMI ability.Based on the annular structure,the common-mode(CM) and difference-mode(DM) modules were proposed.The former one was formed by the 'capacitance and inductance'(LC unit),and the later one was formed by an independent DM capacitor and the leakage inductance leaking from the LC units.The extraction of the unit-length electromagnetic parameters was the foundation for analyzing each module,even the characteristics of the whole EMI filter.The axisymmetric electrostatic field model of LC unit was established to extract the turn-to-turn partition capacitances.Considering the skin effect,proximity effect and core loss,the model of harmonic magnetic field of the LC unit system was also established to extract the inductances and resistances.The leakage inductance could serve as the DM inductance.So,the model of harmonic magnetic field with leakage layer between LC units was presented to extract this parameter.The DM capacitance could be calculated directly using the approximate expression of the parallel-plate.Under the appreciate boundary conditions,the frequency properties of impedances were measured with the established distributed-parameter model.The results verify the validity of the proposed extraction method and the accuracy of the extracted parameters.

Extraction of parasitic capacitance of integrated LC component for planar EMI filter

Parasitic Inductance Modeling for On-chip Interconnects Based on IC Analysis on Inductive Effects

Extraction of Magnetic Parameters for Planar EMI Filter Elements

Cancellation of parasitic inductance for filtering capacitor with planar windings

Experimental Characterization of On-Chip Inductor and Capacitor Interconnect: Part I. Series Case

Impedance characteristics of LC unit for plane integrated filter

Characteristics research for planar common mode EMI filter based on toroidal LC coil

Integrated EMI filter design with flexible PCB structure

Comparative analysis of methods for obtaining equivalent capacitance in single-layer EMI filter inductors

An LC Resonant Method for the Accurate Extraction of Small Parasitic Resistance

Capacitance extraction of on-chip circular stacked inductors

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

Capacitance Extraction of Three-Dimensional Interconnects Using Element-By-Element Finite Element Method (Ebe-Fem) and Preconditioned Conjugate Gradient (pcg) Technique

Modeling of Parasitic Inductive Couplings in a Pi-Shaped Common Mode EMI Filter

Design and Experiment Research of Integrated EMI Filter Based on Flexible Multi-Layer Foils

Simplified Extraction of Stray Capacitance for Spiral Inductor Using Finite Element Method

Analysis and Simulation of Parasitic Parameters for Pcb Planar Transformer

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

Modeling of Integrated EMI Filter with Flexible Multi-Layer (FML) Foils

Analytical Estimation Method of Winding Parasitic Capacitance for High-Frequency High-Voltage Application

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes