Abstract:This work reports a new simulated inductor which is suitable for a Contactless Electrical Tomography (CET) system and can effectively overcome the unfavorable influence of coupling capacitance on the measurement results. By detailed analysis and comparison, it is found that the grounded simulated inductor has a simple circuit construction but its output current is not equal to its input current, while the floating simulated inductor can be used as an independent inductor module but its circuit structure is relatively complex. A new simulated inductor is designed by compensating the currents from the common node of an introduced independent power source to the main circuit. The new simulated inductor combines the advantages of the grounded simulated inductor and the floating simulated inductor. It has the simple construction similar to that of the grounded simulated inductor and its input current is equal to the output current, which means it can be used as an independent module. The impedance measurement and practical image reconstruction experiments were carried out to verify the effectiveness of the new simulated inductor. The experimental results show that the design of the new simulated inductor is successful, and the performance of the impedance measurement is satisfactory. The signal-to-noise ratio of the CET system is improved. Meanwhile, the research work also indicates that in the case when the independent power source is not available, the new simulated inductor is also an effective alternative method. But the phase difference between input signal and output signal is approximately 90° when the elimination principle is realized.

Simplified Extraction of Stray Capacitance for Spiral Inductor Using Finite Element Method

Model Description and Parameter Extraction of On-Chip Spiral Inductors for MMICs

Analysis of Frequency- and Temperature-Dependent Substrate Eddy Currents in On-Chip Spiral Inductors Using the Complex Image Method

A Compact Circuit Model of On-Chip Multi-layer Spiral Inductors on Silicon Substrate

A Physics-Aware Methodology for Equivalent Circuit Model Extraction of TSV-inductors

Modelling On-Chip Circular Double-Spiral Stacked Inductors for RFICs

A derived circuit model for spiral inductors on lossy silicon substrate

Capacitance extraction of on-chip circular stacked inductors

Compact Equivalent Circuit Model Of Two-Layer Spiral Inductors

A Novel Compact Model for On-Chip Vertically-Coiled Spiral Inductors

COMBING MULTILEVEL GREEN'S FUNCTION INTERPOLATION METHOD WITH VOLUME LOOP BASES FOR INDUCTANCE EXTRACTION PROBLEMS

Capacitance extraction of high-density 3D interconnects using finite element method

Capacitance Extraction of Three-Dimensional Interconnects Using Element-By-Element Finite Element Method (Ebe-Fem) and Preconditioned Conjugate Gradient (pcg) Technique

On the Design of a New Simulated Inductor Using a Contactless Electrical Tomography System As an Example

Accurate Model for Micromachined Microwave Planar Spiral Inductors

Wide-Band Modeling On-Chip Spiral Inductors Using Frequency-Dependent Conformal ADI-FDTD Method

A Novel Technique Fast Optimizing the Layout Parameters of Planar Spiral Inductor

Efficient Impedance Calculation for RF CMOS Spiral Inductors Incorporating Eddy Currents Effect

An Approach For Determining Equivalent Circuit Model Of On-Chip Inductors (Vol 55, Pg 2363, 2013)

The Magnetized Capacitance, First Resonant Frequency, and Electromagnetic Analysis of Inductors With Ferrite Cores

Investigation of Dynamic Stray Capacitance and Circuit Network Model for Planar Inductor with Nanocrystal Magnetic Core