Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

The technique for measurement path be controlled based on surface reverse and ultrasonic measurement

Research of Integrated Ultrasonic Auto Detecting Method on Curved Surfaces

Research on Ultrasonic Measurement of the Large Curved Surface Parts

Study on Path Generation Method of Curved Surface Part for Ultrasonic Inspection

Research on Ultrasonic Detection of Complex Surfaces

Automatic Sensitivity Compensation Technology on Ultrasonic Inspection of Curved Surface

Research of surface reconstruction and path generation by ultrasonic inspection

Digitalization of Unknown Free-Form Surface Based on Variable-Direction Point Laser Sensor

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

A Method of Ultrasonic Detection for Sculptured Surface Not Accurately Fixtured

Probe’s Auto-alignment in Curved Components Ultrasonic Survey

Application of Reverse Engineering to Ultrasonic Nondestructive Testing of Surface Part

Algorithm of Real-Time Path Generation for Ultrasonic Inspection of Sculptured Surface

A Study on Free Form Surface Digitization Based on Ultrasonic Distance Measurement

Measurement of deformed surface and key data processing based on reverse engineering

Calibration of Laser Beam-Direction for Point Laser Sensors

Research on Ultrasonic C-scan Technique for Large Unsymmetric Composite Component

Algorithm of Non-isoparametric Path Generation for Ultrasonic Inspection of Sculptured Surfaces

Ultrasonic Probe Position and Orientation Planning for Curved Components with Variable Thickness Based on Ultrasonic Beam Analysis

State Searching Machining Technique for Curved Surface Parts

Robotic Ultrasonic Measurement of Residual Stress in Complex Curved Surface Components