Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

Algorithm of Non-isoparametric Path Generation for Ultrasonic Inspection of Sculptured Surfaces

Algorithm of Real-Time Path Generation for Ultrasonic Inspection of Sculptured Surface

Research of surface reconstruction and path generation by ultrasonic inspection

Study on Path Generation Method of Curved Surface Part for Ultrasonic Inspection

Ultrasonic Inspection Method of Sculptured Surface Based on Locating by Software

Based on B-spline automated inspection trajectory generation of free form by ultrasonic scanning

Research of Integrated Ultrasonic Auto Detecting Method on Curved Surfaces

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

Research on Ultrasonic Detection of Complex Surfaces

Inspection Path Planning of Complex Surface Based on One-Step Inverse Approach and Curvature-Oriented Point Distribution.

A Method of Ultrasonic Detection for Sculptured Surface Not Accurately Fixtured

Non-equidistant Scanning Path Generation for the Evaluation of Surface Curvature in Metrological Scanning Probe Microscopes

A Spiral-Based Inspection Path Generation Algorithm for Efficient Five-Axis Sweep Scanning of Freeform Surfaces

Collision-Free Inspection Path Generation for Coordinate Measuring Machines

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Optimal path planning for automated dimensional inspection of free-form surfaces

Curved Path Planning Based on 3D Vision Water Immersion Ultrasonic Nondestructive Testing

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Path Checking in Curved Component Ultrasonic Inspection

A path planning algorithm for PCB surface quality automatic inspection

A New NURBS Tool Path Generation Algorithm for Precise Sculptured Surface Machining