Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

Optimal path planning for automated dimensional inspection of free-form surfaces

Study of Free-Form Surface Non-Contact Measurement子Path Planning and Related Algorithms

Algorithm of Real-Time Path Generation for Ultrasonic Inspection of Sculptured Surface

Research of surface reconstruction and path generation by ultrasonic inspection

Touch Trigger Probe-Based Interference-Free Inspection Path Planning for Free-Form Surfaces by Optimizing the Probe Posture

Algorithm of Non-isoparametric Path Generation for Ultrasonic Inspection of Sculptured Surfaces

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

Study on Path Generation Method of Curved Surface Part for Ultrasonic Inspection

Time optimization based trajectory planning of ultrasonic inspection

Multi-robot coverage path planning for dimensional inspection of large free-form surfaces based on hierarchical optimization

Automatic Sweep Scan Path Planning for Five-Axis Free-Form Surface Inspection Based on Hybrid Swept Area Potential Field

Robotic Trajectory Planning for Non-Destructive Testing Based on Surface 3D Point Cloud Data

PSO-Based Optimal Coverage Path Planning for Surface Defect Inspection of 3C Components with a Robotic Line Scanner

Inspection Path Planning of Complex Surface Based on One-Step Inverse Approach and Curvature-Oriented Point Distribution.

Adaptive Five-Axis Scanning of Deformed Surfaces Based on Real-Time Path Planning

A Spiral-Based Inspection Path Generation Algorithm for Efficient Five-Axis Sweep Scanning of Freeform Surfaces

Collision-Free Inspection Path Generation for Coordinate Measuring Machines

Sweep scan path planning for efficient freeform surface inspection on five-axis CMM

Develop feedback robot planning method for 3D surface inspection

CAD-BASED PATH PLANNING FOR LINE LASER SCANNING OF CURVED SURFACE

An Image-Based Algorithm for Generating Smooth and Interference-Free Five-Axis Sweep Scanning Path.