Abstract:A reliable non-destructive testing technique that enables effective detection and quantification of defects within safety-critical curved structures is highly demanded both in manufacture and service. Conventional Ultrasonic Testing (UT) methods usually adopt planar ultrasonic probes and it is preferable to adjust the probe axis direction perpendicular to the curved surface, because both the transmitting and receiving sensitivities in the probe axis direction are the highest. This paper proposes a new UT method using a hemispherical-omnidirectional ultrasonic probe. This probe has an omnidirectional directivity pattern and can cover curved surfaces with normal incident ultrasounds at different scan positions without the necessity of adjusting the probe attitude and position to follow the curved surface profiles. A surface reconstruction algorithm is firstly proposed to estimate curved surface profiles, which is based on a fast-imaging algorithm for ultra-wideband radar called the Shape Estimation Algorithm based on the Boundary scattering transform and Extraction of Directly scattered waves (SEABED). This method only uses surface reflection echoes, and thus can inspect curved structures without knowing the surface profiles a prior. Further, the Synthetic Aperture Focusing Technique (SAFT) is implemented to generate a focused image of internal defects by performing delay-and-sum beamforming on defect echoes based on the reconstructed surface profile. The proposed UT method is eventually experimentally verified on a curved plexiglass specimen with 29.4 mm surface curvature radius containing three ϕ 3.5 mm Side Drilled Holes (SDHs) at different depths. Results show that compared with the planar ultrasonic probe, the reconstructed surface profile via SEABED is much wider and accurate with a relative error ≤ 0.47%. All SDHs are not only clearly positioned with relative errors ≤ 7.43%, but also can be accurately quantified from the curvature radius of SDH indications in the SAFT images with relative errors ≤ 8.60%. This work proves that the UT method based on the hemispherical-omnidirectional ultrasonic probe can emerge as a promising technique to inspect curved structures with high efficiency and accuracy, which has great potential in practical applications.

Research of Integrated Ultrasonic Auto Detecting Method on Curved Surfaces

Research on Ultrasonic Detection of Complex Surfaces

Research on Ultrasonic Measurement of the Large Curved Surface Parts

Study on Path Generation Method of Curved Surface Part for Ultrasonic Inspection

The technique for measurement path be controlled based on surface reverse and ultrasonic measurement

Automatic Sensitivity Compensation Technology on Ultrasonic Inspection of Curved Surface

Curved Path Planning Based on 3D Vision Water Immersion Ultrasonic Nondestructive Testing

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

Research of surface reconstruction and path generation by ultrasonic inspection

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Application of Reverse Engineering to Ultrasonic Nondestructive Testing of Surface Part

Ultrasonic Non-Destructive Testing System of Semi-Enclosed Workpiece with Dual-Robot Testing System

Study on Edge Detection Based on Sampling in CNC Non-Contact Measuring System

Ultrasonic inspection of curved structures with a hemispherical-omnidirectional ultrasonic probe via linear scan SAFT imaging

NON-CONTACT NONDESTRUCTIVE INSPECTION METHOD FOR 3-D CURVED SURFACES BASED ON VISION DETECTION TECHNOLOGY

Ultrasonic Transmission Method for Testing Curved Composite Parts

A Method of Ultrasonic Detection for Sculptured Surface Not Accurately Fixtured

Robotic Ultrasonic Measurement of Residual Stress in Complex Curved Surface Components

Nondestructive Testing Method for Curved Surfaces Based on the Multi-Gaussian Beam Model

Research on Automatic Ultrasonic Waveform Tracking for Curved Surface Composite Parts with Variable Thickness

Robot-Assisted Trajectory Planning Method for NDT