Abstract:The light output of deep ultraviolet (UV-C) AlGaN light-emitting diodes (LEDs) is limited due to their poor light extraction efficiency (LEE). To improve the LEE of AlGaN LEDs, we developed a fabrication technology to process AlGaN LEDs grown on SiC into thin-film flip-chip LEDs (TFFC LEDs) with high LEE. This process transfers the AlGaN LED epi onto a new substrate by wafer-to-wafer bonding, and by removing the absorbing SiC substrate with a highly selective SF6 plasma etch that stops at the AlN buffer layer. We optimized the inductively coupled plasma (ICP) SF6 etch parameters to develop a substrate-removal process with high reliability and precise epitaxial control, without creating micromasking defects or degrading the health of the plasma etching system. The SiC etch rate by SF6 plasma was ~46 \mu m/hr at a high RF bias (400 W), and ~7 \mu m/hr at a low RF bias (49 W) with very high etch selectivity between SiC and AlN. The high SF6 etch selectivity between SiC and AlN was essential for removing the SiC substrate and exposing a pristine, smooth AlN surface. We demonstrated the epi-transfer process by fabricating high light extraction TFFC LEDs from AlGaN LEDs grown on SiC. To further enhance the light extraction, the exposed N-face AlN was anisotropically etched in dilute KOH. The LEE of the AlGaN LED improved by ~3X after KOH roughening at room temperature. This AlGaN TFFC LED process establishes a viable path to high external quantum efficiency (EQE) and power conversion efficiency (PCE) UV-C LEDs.

Optical and Thermal Performance of Nitride-Based Thin-Film Flip-Chip Light-Emitting Diodes

Unusual Strategies For Using Indium Gallium Nitride Grown On Silicon (111) For Solid-State Lighting

Efficiency improvement analysis of nano-patterned sapphire substrates and semi-transparent superlattice contact layer in UVC light-emitting diodes

Improved performance of GaN-based light emitting diodes with nanopatterned sapphire substrates fabricated by wet chemical etching

High Luminous Efficacy Phosphor-Converted Mass-Produced White LEDs Achieved by AlN Prebuffer and Transitional-Refraction-Index Patterned Sapphire Substrate

Improving the Light Extraction Efficiency of GaN-Based Thin-Film Flip-Chip Micro-LEDs through Inclined Sidewall and Photonic Crystals

Enhancement of Light Extraction from Microstructured GaN-Based Light Emitting Diodes by Technique of Nanoimprint

Fabrication technology for high light-extraction ultraviolet thin-film flip-chip (UV TFFC) LEDs grown on SiC

High-Power GaN-Based Vertical Light-Emitting Diodes on 4-Inch Silicon Substrate

Suppressing optical crosstalk for GaN/InGaN based flip-chip micro light-emitting diodes by using an air-cavity patterned sapphire substrate as a light filter

Enhanced light extraction efficiency of a InGaN/GaN micro-square array light-emitting diode chip

Performance Enhancement of Ingan-Based Light-Emitting Diodes with Ingan/Alinn/Ingan Composition-Graded Barriers

InGaN-Based Light-Emitting Diodes with a Cone-Shaped Sidewall Structure Fabricated Through a Crystallographic Wet Etching Process

Progress in Nitride-based LEDs on Silicon Substrates

Improvement of Surface Light Extraction from Flip‐chip GaN‐based LED by Embossing of Thermosetting Polymers

Improving the External Quantum Efficiency of High-Power GaN-Based Flip-Chip LEDs by Using Sidewall Composite Reflective Micro Structure

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Efficient Dislocation Prevention and Thermal Transport Network Constructed by CNT Films on PSS for GaN-Based UV LEDs

Optical Characterization of Light-Emitting Diodes Fabricated with Vertical and Flip-Chip Structure

High-Efficiency Vertical-Chip Micro-Light-Emitting Diodes via p-GaN Optimization and Surface Passivation

Junction temperature and reliability of high-power flip-chip light emitting diodes