Abstract:A high-selectivity bandpass filter (BPF) based on two merged ring resonators is presented in this paper. The structure of this proposed BPF can be seen as the two one-wavelength ring resonators merged each other by sharing the common lambda(g)/2 microstrip line. Due to symmetric structure, it can be analyzed by even- and odd-mode method and the locations of six transmission zeros are calculated using input impedance deductions. For further demonstration, a BPF example centered at 2 GHz is fabricated with high frequency selectivity. The measured 3-dB fractional bandwidth is 11% (1.89-2.11 GHz) and insertion loss is less than 2 dB in the passband. Good agreement between simulation and measurement verifies the feasibility of the design method. this method is at the expense of a large circuit size. Besides, several novel structures are introduced to achieve higher performance, such as two pairs of twist modified split-ring resonators [8] and stepped impedance open-stub loaded ring resonator [9]. In this paper, a BPF based on two merged ring resonators with high selectivity is proposed, which is quite different from the BPF using ring resonators in [10]. Due to the symmetric structure of this proposed BPF, the distributions of six TZs can be calculated by odd-and even-mode method. The theoretical derivation of the proposed BPF is demonstrated. For validation, a BPF example centered at 2 GHz is fabricated and measured.

High-selectivity single-ended and balanced bandpass filters using ring resonators and coupled lines loaded with multiple stubs

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

High-selectivity Bandpass Filter Using Six Pairs of Quarter-Wavelength Coupled Lines

High-Selectivity Bandpass Filter Based on Two Merged Ring Resonators

High Selectivity Wideband Bandpass Filter Based on Stepped Impedance Open Stubs Loaded Ring Resonator

High Selectivity Bandpass Filter Using Three Pairs of Coupled Lines Loaded with Shorted Stubs

A High Selectivity Dual‐band Bandpass Filter Using Quadruple‐mode Multi‐stub Loaded Ring Resonator (SLRR)

Dual-Band Bandpass Filters Using Open-/Short- Circuited Stub-Loaded Quarter-Wavelength Resonators

A High Selectivity Quadruple-Mode Bpf with Two Short-Circuited Stub-Loaded Sirs

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

Design of Tri-Band Balanced Filter with Wideband Common-Mode Suppression and Upper Stopband Using Square Ring Loaded Resonator

Coupled‐line Band‐pass Filter with T‐shaped Structure for High Frequency Selectivity and Stopband Rejection

A Compact Wideband Bandpass Filter Based on Parallel-Coupled Stub-Loaded Resonator

A Quad‐band Bandpass Filter Using Split‐ring Based on T‐shaped Stub‐loaded Step‐impedance Resonators

Super High-Selectivity Fifth-Order Bandpass Filter with Twelve Transmission Zeros

High Selectivity Seventh-Order Wideband Bandpass Filter Using Coupled Lines and Open/shorted Stubs

Compact Balanced Tri-Band Superconducting Band-Pass Filter Using Double Square Ring Loaded Resonators

Compact Bandpass Filter Using Two Ring Resonators And Two Open Stubs