Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

Coupled‐line Band‐pass Filter with T‐shaped Structure for High Frequency Selectivity and Stopband Rejection

High-selectivity Bandpass Filter Using Six Pairs of Quarter-Wavelength Coupled Lines

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Bandpass Filter Using Coupled‐line‐stub Cascaded Structure with High Stopband Rejection

High-Selectivity Wideband Bandpass Filter Using Simple Coupled Lines with Multiple Transmission Poles and Zeros

High Selectivity Bandpass Filter Using Three Pairs of Coupled Lines Loaded with Shorted Stubs

Compact Dual‐band Bandpass Filter Using Coupled Lines and Shorted Stubs

Super High-Selectivity Fifth-Order Bandpass Filter with Twelve Transmission Zeros

High Selectivity Seventh-Order Wideband Bandpass Filter Using Coupled Lines and Open/shorted Stubs

A Compact Wideband Bandpass Filter Based on Parallel-Coupled Stub-Loaded Resonator

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

COMPACT MIXED-CROSS COUPLED BANDPASS FILTER WITH ENHANCED FREQUENCY SELECTIVITY

High-selectivity single-ended and balanced bandpass filters using ring resonators and coupled lines loaded with multiple stubs

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Narrow‐band bandpass filter with very wide upper stopband

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Sharp Roll-Off Bandpass Filter Using Coupled Lines and Stepped-Impedance Stubs

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

A Compact and High Selectivity Bandpass Filter Based on Substrate Integrated Coaxial Line Technology

Compact Bandpass Filter with Improved Stopband Characteristics Using S-L Coupling