Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

A novel compact triple-passband filter design based on stepped impedance stub-loaded resonators

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

A Fully Packaged Bandpass Filter on Stripline Patch Resonator With Wide Upper Stopband

High-selectivity wideband bandpass filter based on quintuple-mode stub-loaded resonator and defected ground structures

Balanced tri- and quad-band BPFs based on SIR with improved passbands selectivity

Sharp-rejection dual ultra-wideband bandpass filter using sextuple mode resonator

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Design of a Wide-Stopband Bandpass Filter Using Stepped Impedance Resonators

Design of a quad-band bandpass filter based on 13-mode resonator

Synthesis Design of Wideband Bandpass Filter With High Selectivity and Harmonic Suppression

Compact and high selectivity dual-mode microstrip BPF with frequency-dependent source–load coupling

Miniaturized Circular Substrate Integrated Waveguide Bandpass Filter With Flexible Mixed Coupling and Wide Stopband Rejection

Design of high selectivity tri-band bandpass filter based on triple transversal transmission path