Abstract:In this paper, a novel compact bandpass filter (BPF) with a wide out-of-band rejection is proposed. It can achieve broadband characteristics by combining hollow bowtie-type spoof surface plasmon polaritons (SSPPs) with complementary H-type defected grounded structures (DGSs) through aperture coupling. Compared with the conventional SSPP unit cells, the hollow bowtie-type structure exhibits much better slow-wave characteristics. The introduced slant antenna type port-coupling can produce a very strong high-performance rejection outside the high frequency stopband. Simulation results show that the SSPPs-DGS-based BPF has an excellent band pass characteristics in a broadband range with − 3dB fractional bandwidth of 43.5% at center frequency f 0 of 2.04 GHz. The return loss in the passband is better than − 12 dB. Furthermore, because of the multiple transmission zeros generated in upper-stop-band, the designed BPF has an extremely strong out-of-band rejection of -40dB from 1.5 f 0 to 4 f 0 ( f 0 is the center frequency). The designed SSPPs-DGS-based BPF is fabricated by conventional printed circuit board (PCB) technology with a compact size of only 0.68λ g *0.34λ g (λ g is the wavelength at the center frequency). The measured results have a good agreement with the simulation ones, which verifies the rationality and feasibility of the design. The miniaturized wideband BPF with broad out-of-band rejection may make it has good application prospect in the new generation microwave communication field.

High-selectivity wideband bandpass filter based on quintuple-mode stub-loaded resonator and defected ground structures

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Wideband Bandpass Filter with High Selectivity Based on Dual‐mode DGS Resonator

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Compact Uwb Bandpass Filter with Dual Notched Bands Using Defected Ground Structures

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

Compact Quad-Mode Bandpass Filter Based on Quad-Mode DGS Resonator

Sharp-rejection dual ultra-wideband bandpass filter using sextuple mode resonator

Analysis and design of a wide stop‐band and high out‐of‐band suppression BPF

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Design of Superconducting Ultra-Wideband Filter with Wide Stopband Based on Quintuple-Mode Resonator

Design of a Wide-Stopband Bandpass Filter Using Stepped Impedance Resonators

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

UWB Bandpass Filter with Dual Notched Bands Using T-Shaped Resonator and L-Shaped Defected Microstrip Structure

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Ultra-Wideband Bandpass Filter with Hybrid Quasi-Lumped Elements and Defected Ground Structure

Super compact and ultra-wideband bandpass filter with three band notches using triple-mode stepped impedance resonator and defected ground structure

Miniaturized broadband high out-of-band rejection bandpass filter based on spoof surface plasmon polaritons with defected ground structure