Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

High Selectivity Bandpass Filter Using Three Pairs of Coupled Lines Loaded with Shorted Stubs

High-selectivity Bandpass Filter Using Six Pairs of Quarter-Wavelength Coupled Lines

High Selectivity Seventh-Order Wideband Bandpass Filter Using Coupled Lines and Open/shorted Stubs

Super High-Selectivity Fifth-Order Bandpass Filter with Twelve Transmission Zeros

Coupled‐line Band‐pass Filter with T‐shaped Structure for High Frequency Selectivity and Stopband Rejection

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

High-Selectivity Wideband Bandpass Filter Using Simple Coupled Lines with Multiple Transmission Poles and Zeros

Bandpass Filter Using Three Pairs of Coupled Lines with Multiple Transmission Zeros

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Single-Ended and Balanced Bandpass Filters Using Multiple Pairs of Coupled Lines and Stepped-Impedance Stubs.

Sharp Roll-Off Bandpass Filter Using Coupled Lines and Stepped-Impedance Stubs

High-selectivity single-ended and balanced bandpass filters using ring resonators and coupled lines loaded with multiple stubs

Compact Bandstop Filters Using Coupled Lines and Open/short Stubs with Multiple Transmission Poles

Compact Dual‐band Bandpass Filter Using Coupled Lines and Shorted Stubs

A planar three-section coupled-line high-selectivity wideband bandstop filter

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Design of high selectivity tri-band bandpass filter based on triple transversal transmission path

A Compact Wideband Bandpass Filter Based on Parallel-Coupled Stub-Loaded Resonator

Fourth-Order Bandpass Filter Using Dual-Mode Ring Resonator and Parallel-Coupled Lines

High Selectivity Quadruple‐mode Broadband Bandpass Filter with Source‐load Coupling

A High Selectivity Quadruple-Mode Bpf with Two Short-Circuited Stub-Loaded Sirs