Abstract:A synthesis method of N th-order wideband bandpass filter (BPF) with cross-coupled or inline topology using inductive-and capacitive-coupling components is presented. The synthesized admittance matrix can fully represent the frequency-dependent characteristics of the J-inverters and resonators that are used to implement the wideband BPF. All negative inductive-coupling elements in the trisection, quadruplet, or conjoined trisection blocks can be transformed into negative capacitive-coupling elements by using the proposed similarity transformation matrix and the corresponding transformation conditions. As a consequence, the resulted admittance matrix can be directly implemented using lumped elements. All values of the lumped elements can be calculated without any optimization. The transformation method of cascaded blocks filter with trisection, quadruplet, and two conjoined trisections is demonstrated through several numerical examples. The fundamental transformation of third-order and fourth-order cross coupled or inline topologies is proposed first. Cascaded block synthesis for higher order wideband BPF with multiple transmission zeros (TZs) is then carried out based on the proposed fundamental transformation. The proposed synthesis method can be applied to N th-order wideband BPF with multiple TZs. To validate the proposed method, a fifth-order cascaded triplets (CTs) filter with fractional bandwidth (FBW) of 66.7%, one TZ at the lower stopband, and two TZs at the upper band are synthesized, designed, and fabricated.

Fourth-Order Bandpass Filter Using Dual-Mode Ring Resonator and Parallel-Coupled Lines

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

A novel miniaturized dual-mode zeroth-order ring bandpass filter with only one left-handed unit

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Design of a quad-band bandpass filter based on 13-mode resonator

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

A dual-wideband bandpass filter with closely spaced passbands using coupled lines and shunt transmission lines loaded with end-connected coupled lines

Dual-band bandpass filter using centrally coupled resonators (CCRs)

A Fully Packaged Bandpass Filter on Stripline Patch Resonator With Wide Upper Stopband

Dual-Band Bandpass Filter Using Parallel Short-Ended Feed Scheme

Synthesis of Wideband Bandpass Filter With Cross-Coupled or Inline Topology for Direct Circuit Implementation Using Lumped Elements