Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Dual-Band Bandpass Filter Using Parallel Short-Ended Feed Scheme

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

Compact Fully‐canonical Dual‐band Bandpass Filter with Independently Controllable Bandwidths

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Dual band bandpass filter using coupled and series capacitors with controllable bandwidths

A dual-wideband bandpass filter with closely spaced passbands using coupled lines and shunt transmission lines loaded with end-connected coupled lines

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

Dual‐band Bandpass Filter Using Stepped‐impedance Stub‐loaded Hexagonal Stepped Impedance Resonator (SIR)

A Dual‐band Superconducting Filter with a Large Bandwidth Ratio

Synthesis Design of High Selectivity Wideband Balanced Bandpass Filter Based on Parallel Coupled Lines