Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Dual band bandpass filter using coupled and series capacitors with controllable bandwidths

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Design of Compact Dual Band Bandpass Filter with Controllable Bandwidths and Good Selectivity

A tri-mode bandpass filter using capacitive and inductive source-load coupling

A Dual‐band Superconducting Filter with a Large Bandwidth Ratio

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

Compact Dual-Mode Bandpass Filter with Wide Stopband Using Capacitance Loaded Square Meander Loop Resonator

A super-compact wideband bandpass filter using capacitor-loaded coupled lines

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Dual-Band Bandpass Filter Using Parallel Short-Ended Feed Scheme

Dual-band Bandpass Filter Based on Mixed Electric and Magnetic Coupling of the Hybrid Quasi-Lumped Resonator

Novel circular dual-mode filter with both capacitive and inductive source-load coupling for multiple transmission zeros

Dual-mode dual-band bandpass filter design using open-loop resonators

Compact dual-band bandpass filter using spiral resonators and short-circuited stub-loaded resonator

Dual-Band Stepped-Impedance Band-Pass Filter

Miniaturized Wideband Bandpass Filter Using Capacitor-Loaded Coupled-Lines

A Frequency-Tunable High-Selectivity Dual-Band Bandpass Filter with Independently Controllable Passbands