Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Compact Fully‐canonical Dual‐band Bandpass Filter with Independently Controllable Bandwidths

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Dual-band bandpass filter using centrally coupled resonators (CCRs)

A novel compact microstrip dual-band bandpass filter with independently controlled center frequencies based on dual-mode resonators concept

A Tunable Balanced Dual‐band BPF with Quasi‐independently Controlled Center Frequency and Bandwidth

Dual-Band Bandpass Filter Using Parallel Short-Ended Feed Scheme

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Compact Tunable Balanced Bandpass Filter with Constant Bandwidth Based on Magnetically Coupled Resonators

Compact dual‐band balanced bandpass filter with controllable passbands using coplanar waveguide spiral cross resonators

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

A 2.2–3.6 GHz CMOS Reconfigurable Fourth-Order Bandpass Filter With Compact Size and High Selectivity Using Transformer-Type Resonators

Miniaturized Circular Substrate Integrated Waveguide Bandpass Filter With Flexible Mixed Coupling and Wide Stopband Rejection

Sharp-rejection dual ultra-wideband bandpass filter using sextuple mode resonator

A Compact Dual‐band Superconducting Filter with Fine‐tuning Coupling Structure