Abstract:Purpose Reinforcement of reinforced concrete (RC) beams in-service have always been an important research field, anchoring steel plate in the bottom of the beams is a kind of common reinforcement methods. In actual engineering, the contribution of pavement layer to the bearing capacity of RC beams is often ignored, which underestimates the bearing capacity and stiffness of RC beams to a certain extent. The purpose of this paper is to study the effect of pavement layer on the RC beams before and after reinforcement. Design/methodology/approach First, static load experiments are carried out on three in-service RC hollow slab beams, meanwhile, nonlinear finite element models are built to study the bearing capacity of them. The nonlinear material and shear slip effect of studs are considered in the models. Second, the finite element models are verified, and the numerical simulation results are in good agreement with the experimental results. Last, the finite element models are adopted to carry out the research on the influence of different steel plate thicknesses on the flexural bearing capacity and ductility. Findings The experimental results showed that pavement layers increase the flexural capacity of hollow slab beams by 16.7%, and contribute to increasing stiffness. Ductility ratio of SPRCB3 and PRCB2 was 30% and 24% lower than that of RCB1, respectively. The results showed that when the steel plate thickness was 1 mm–6 mm, the bearing capacity of the hollow slab beam increased gradually from 2158.0 kN.m to 2656.6 kN.m. As the steel plate thickness continuously increased to 8 mm, the ultimate bearing capacity increased to 2681.0 kN.m. The increased thickness did not cause difference to the bearing capacity, because of concrete crushing at the upper edge. Originality/value In this paper, based on the experimental study, the bearing capacity of hollow beam strengthened by steel plate with different thickness is extrapolated by finite element simulation, and its influence on ductility is discussed. This method not only guarantees the accuracy of the bearing capacity evaluation, but also does not require a large number of samples, and has certain economy. The research results provide a basis for the reinforcement design of similar bridges.

Experimental and Numerical Study of Hollow Core Slabs Strengthened with Mounted Steel Bars and Prestressed Steel Wire Ropes

Experimental Research on A Self-Supported Floor System

Experimental study on reinforcing the prestressed concrete hollow slab with CFRP

Strengthening of hollow core precast prestressed reinforced concrete slabs using different techniques

STRENGTHENING OF PRESTRESSED HOLLOW CORE SLABS WITH OPENINGS USING NSM-CFRP STRIPS

Experimental Study on the Bending Resistance of Hollow Slab Beams Strengthened with Prestressed Steel Strand Polyurethane Cement Composite

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Investigating the shear behaviors of hollow core beams strengthened with ESS-HCC and shear steel rebars

Experimental and theoretical investigations on the flexural behavior of precast concrete slabs reinforced with prestressing BFRP bars and fibers

Experimental investigation and evaluation of shear performance of hollow slab beams strengthened by cavity grouting method

Experimental study on flexural behavior of partially precast high-strength steel reinforced ultra-high performance concrete beam

Flexural behavior of 15-year-old full-scale hollow slab beams strengthened with fiber-reinforced composites

Experimental Research on Strengthening Transverse Connections of Prefabricated Concrete Hollow Core Slab Beam Bridges

Experimental study on the flexural performance of concrete hollow composite slabs with tightly connected panel sides

Experimental study on shear behavior of hollow slab beam strengthened with pasting steel plates

Experimental study on the flexural behavior of RC beams strengthened with prestressed stainless steel wire mesh and permeability polymer mortar

Study of A Reinforced Concrete Beam Strengthened Using A Combination of Sma Wire and Cfrp Plate

Comparison of flexural capacity of different hollow slab beams with/without pavement layer reinforced by steel plates

Experimental Study of Reinforced Concrete T-Beams Strengthened with a Composite of Prestressed Steel Wire Ropes Embedded in Polyurethane Cement (PSWR–PUC)

Full-range Experimental Analysis of Flexural Performance of an Existing PC Hollow Slab