Abstract:A novel type of traditional composite member-unbonded prestressed I-shaped steel encased in a UHPC (PSRUHPC) beam is proposed to reduce the brittleness of UHPC beams and improve their bearing capacity. A PSRUHPC beam, an unbonded prestressed UHPC (PRUHPC) beam, and an I-shape steel UHPC (SRUHPC) beam were manufactured, and their flexural static performances were assessed using a flexural comparison test. The test results reveal that the flexural process of the PSRUHPC beam is similar to that of ordinary reinforced concrete beams, and UHPC crushing in the compression zone is a sign of failure. Due to the bridge coupling effect of steel fiber, the crushed concrete still maintains good integrity without bursting, the UHPC in the tension zone remains functional after cracking, and the cracking inflection point of the load–deflection curve was not obvious. The PSRUHPC beam showed a significantly improved bearing capacity and flexural stiffness, its load–deflection curve exhibited significantly more energy consumption, and its bending ductility performance was improved, with better deformation properties. Compared with PRUHPC beams, PSRUHPC beams show a bearing capacity increase of 55.3%, a cracking load increase of 11.9%, and a displacement ductility coefficient increase of 76.2%. Compared with SRUHPC beams, PSRUHPC beams show a 15.4% increase in bearing capacity, a 50.2% increase in cracking load, and a 12.1% increase in displacement ductility coefficient. The application of prestress can significantly improve the stiffness of the beam prior to cracking. The cracking loads of prestressed ordinary concrete beams and steel-reinforced concrete beams account for 20–30% of their ultimate loads, which value was 40–50% for the tested beams. The change trend of strain in the section steel and UHPC is roughly the same at the same height, and the strains of the two deviated after most of the section steel yielded under tension, but they can generally work together. When the tested beams were cracked, multiple cracks appeared, which were fine and dense. The magnetic flux sensor cable force-monitoring system can better monitor the strand stress increment of unbonded prestressed steel UHPC beams, where the prestressed strand did not yield tension under the final state; the load–strand stress increment curve was basically the same as the load–deflection curve, and the stress increment of the unbonded steel strand positively correlated with the midspan deflection. Finite element simulation was used to verify the test results, and we determined the reinforcement ratios for non-prestressed and prestressed reinforcement, as well as the ratio of a steel-containing section, the effective prestress, the height of prestressed reinforcement, the position and strength of I-shaped steel, and whether or not the prestressed reinforcement was bonded. The effects of these parameters on the bearing capacity and displacement ductility coefficient of PSRUHPC beams were studied. The results can provide a reference for subsequent theoretical design calculations.

Experimental Study on the Bending Resistance of Hollow Slab Beams Strengthened with Prestressed Steel Strand Polyurethane Cement Composite

EXPERIMENTAL STUDY OF A NEW RIBBED PRESTRESSED CONCRETE LAMINATED SLAB

Research on Flexural Bearing Capacity of Reinforced Hollow Slab Beams Based on Polyurethane Composite Material Positive and Negative Pouring Method

Experimental studies of the bearing capability of a type of steel-concrete composite slab

Experimental Study on Flexural Behavior of Prestressed Precast Component Composite Beams

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Experimental study on flexural behavior of partially precast high-strength steel reinforced ultra-high performance concrete beam

Flexural behavior of 15-year-old full-scale hollow slab beams strengthened with fiber-reinforced composites

Experimental and theoretical study on flexural behavior of steel-concrete composite beams strengthened by CFRP plates with unbonded retrofit systems

Experimental study on the flexural performance of concrete beam strengthened with ultra high toughness cementitious composites

Flexural performance investigation of steel-concrete composite beams strengthened with prestressed CFRP tendons in the negative bending moment region

Flexural Behaviors of Rc Beams Strengthened with Post-Poured Uhtcc Layer

Experimental and Numerical Study on the Flexural Behaviors of Unbonded Prestressed I-Shaped Steel Encased in Ultra-High-Performance Concrete Beams

Investigation on flexural behavior of steel-UHPC composite beams with steel shear keys

Experimental study on the flexural performance of concrete hollow composite slabs with tightly connected panel sides

Experimental Research on Mechanical Properties of Prestressed Truss Concrete Composite Beam Encased with Circular Steel Tube

Experimental and Theoretical Investigation of Prefabricated Timber-Concrete Composite Beams with and Without Prestress

Experimental Study of Reinforced Concrete T-Beams Strengthened with a Composite of Prestressed Steel Wire Ropes Embedded in Polyurethane Cement (PSWR–PUC)

Bending resistance mechanism of prestressed ultra-high performance concrete - reinforced concrete beam based on a full-scale experiment

Nonlinear Finite Element Analysis of Hollow Slab Beam Bridge Reinforced with Steel Plate-Fiber Polyurethane Cement (SP-FPUC) Composite

A Comprehensive Study on the Effect of Reinforcing Methods on the Flexural Behaviour of Concrete-RUHTCC Composite Beams