Abstract:<p>During laser powder bed fusion additive manufacturing, laser power absorption is governed by a protean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their instantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we focus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser absorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 µs due to a dramatic change in the vapor depression aspect ratio – an event known to create porosity. As several industrial scan strategies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addition to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.</p>

Model of Laser Energy Absorption Adjusted to Optical Measurements with Effective Use in Finite Element Simulation of Selective Laser Melting

New Heat Source Model for Accurate Estimation of Laser Energy Absorption Near Free Surface in Selective Laser Melting

Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing

A Thermo-Metallurgical-mechanical Model for Selective Laser Melting of Ti6Al4V

Simulation of Powder Packing and Thermo-Fluid Dynamic of 316L Stainless Steel by Selective Laser Melting

A Finite Element Model of Thermal Evolution in Laser Micro Sintering

Numerical Simulation of the Effect of Laser Power on the Temperature Field in Selective Laser Melting

Analytical Modeling and Experimental Investigation of the Particle Scale Energy Absorption Mechanism in Laser-Based Directed Energy Deposition

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

A new heat source model for selective laser melting simulations based on energy distribution on the powder layer and the surface of substrate

Finite Element Analysis of Interaction of Laser Beam with Material in Laser Metal Powder Bed Fusion Process.

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Transient Temperature Evolution of Selective Laser Melting Process Based on Multilayer Finite Element Model

Modeling of the Thermal Physical Process and Study on the Reliability of Linear Energy Density for Selective Laser Melting

The influence of laser characteristics on internal flow behaviour in laser melting of metallic substrates

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

FINITE ELEMENT SIMULATION FOR TEMPERATURE EVOLUTION IN DIRECT METAL LASER SINTERING BASED ON MATERIAL PROPERTIES TRANSFORMATION WITH LOAD STEPS

Electromagnetic Wave-Based Analysis of Laser–particle Interactions in Directed Energy Deposition Additive Manufacturing

Heat transfer model and finite element formulation for simulation of selective laser melting

Overview of Finite Elements Simulation of Temperature Profile to Estimate Properties of Materials 3D-Printed by Laser Powder-Bed Fusion*

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer