Abstract:<p>During laser powder bed fusion additive manufacturing, laser power absorption is governed by a protean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their instantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we focus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser absorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 µs due to a dramatic change in the vapor depression aspect ratio – an event known to create porosity. As several industrial scan strategies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addition to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.</p>

Finite Element Analysis of Interaction of Laser Beam with Material in Laser Metal Powder Bed Fusion Process.

Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing

Laser-particle Interaction-Based Heat Source Model of Laser Powder Bed Fusion Additive Manufacturing

Thermal Flow Characteristics and the Evolution of Laser Absorption in Laser Powder Bed Fusion of Cu-Cr-Zr Alloy

Investigation of Laser-Powder Interaction in Laser Powder Bed Fusion Process in Additive Manufacturing

A semi-analytical approach for analysis of thermal behaviors coupling heat loss in powder bed fusion

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

A Finite Volume-Based Thermo-Fluid-mechanical Model of the LPBF Process

Overview of Finite Elements Simulation of Temperature Profile to Estimate Properties of Materials 3D-Printed by Laser Powder-Bed Fusion*

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Model of Laser Energy Absorption Adjusted to Optical Measurements with Effective Use in Finite Element Simulation of Selective Laser Melting

Model-Based Sensitivity Analysis of the Temperature in Laser Powder Bed Fusion

FINITE ELEMENT SIMULATION FOR TEMPERATURE EVOLUTION IN DIRECT METAL LASER SINTERING BASED ON MATERIAL PROPERTIES TRANSFORMATION WITH LOAD STEPS

Particle-based modelling of laser powder bed fusion of metals with emphasis on the melting mode transition

Finite element modeling of melt pool dynamics in laser powder bed fusion of 316L stainless steel

A three-phase model for simulation of heat transfer and melt pool behaviour in laser powder bed fusion process

Finite Element Modeling and Simulation of IN738 Laser Powder Bed Fusion Process Assisted Via Machine Learning

Experimental and numerical comparison of heat accumulation during laser powder bed fusion of 316L stainless steel

High-power Laser-Matter Interaction During Laser Powder Bed Fusion

Simulation of Temperature Distribution in Single Metallic Powder Layer for Laser Micro-Sintering

High-power Fiber Laser Incident Beam Absorptivity Variation of Molten Pool Surfaces During Their Solid-Liquid-gas State Evolution