Abstract:Ultra-high-performance seawater sea-sand concrete (UHPSSC) has attracted increasing attentions over the past few years as it exhibits exceptional mechanical and durability properties similar to conventional ultra-high-performance concrete (UHPC). Comparing to conventional UHPC, UHPSSC has great advantages when applied in marine engineering, particularly in offshore projects where construction materials are not easily accessible, and the transportation is costly. Nonetheless, current production of UHPSSC still necessitates large amounts of cement due to its low water/binder ratio. The larger demands of cement in manufacturing UHPSSC/UHPC than ordinary concrete can lead to substantial increase in the carbon emission. Therefore, an eco-friendly UHPSSC is developed in this paper by incorporating a promising ternary binder system (LC3) that consists of limestone (LS), calcined clay (metakaolin) and cement. The influence of the metakaolin (MK) dosage on the mechanical, hydration and microstructure properties of UHPSSC is comprehensively studied by carrying out a variety of experiments including mechanical test, isothermal conduction calorimetry test, TGA, XRD, SEM etc. The results showed that the UHPSSC mixed with LC3 exhibited lower early-age compressive strength than the reference mix, but its long-term strength was better than the reference group owing to the formation of more hydrates at the late age by the pozzolanic reaction of MK and the synergistic reaction between LS, MK and cement. Based on this study, the coupled replacement rate of cement by LS and MK could reach up to 40% without strength compromise. Nonetheless, 20% MK and 10% LS appeared to be the optimum substitution rate (total substitution rate of 30%) where the highest long-term strength was achieved. The main exothermic peak and total heat of hydration normalized per binder weight decreased with the increase of MK content level, but the main peak occurred earlier. Moreover, the addition of seawater can promote the hydration, leading to a greater main exothermic peak.

The Role of Seawater in Interaction of Slag and Silica Fume with Cement in Low Water-to-binder Ratio Pastes at the Early Age of Hydration

Mechanical properties and hydration of ultra-high-performance seawater sea-sand concrete (UHPSSC) with limestone calcined clay cement (LC3)

Workability, strength, and shrinkage of ultra-high-performance seawater, sea sand concrete with different OPC replacement ratios

Effect of Seawater on Hydration and Sulfate Resistance of Noncement Mortars

Effects of Seawater, NaCl, and [math] Solution Mixing on Hydration Process of Cement Paste

Experimental study on strength and abrasion-resistance enhancement admixture

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

Rheological properties, compressive strength, hydration products and microstructure of seawater-mixed cement pastes

Discovering Explanations

Hydration Characteristics of Slag-Ca(OH)2-Al2O3 Binder in a 60 °C Curing Environment with Brine as Mixing Water

Investigating the effects of seawater and sea sand aggregates and supplementary cementitious materials on the early shrinkage and crack resistance of concrete

Characteristics of alkali-activated slag powder mixing with seawater: Workability, hydration reaction kinetics and mechanism

Hydration, mechanical properties and microstructure of lime-pozzolana pastes by recycling waste sludge ash under marine environment

Influence of Ultra-Fine Slag and Silica Fume on Properties of High-Strength Concrete

Sulphate Corrosion Mechanism of Ultra-High-Performance Concrete (UHPC) Prepared with Seawater and Sea Sand

Hydration of Portland cement with seawater toward concrete sustainability: Phase evolution and thermodynamic modelling

Sustainable ultra-high performance concrete with incorporating mineral admixtures: Workability, mechanical property and durability under freeze-thaw cycles

A comparison between alkali‐activated slag/fly ash binders prepared with natural seawater and deionized water

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Performance assessment of seawater fly ash cement paste with integrated physicochemical- geochemical simulation platform and experimental validation

Development of sustainable concrete incorporating seawater: A critical review on cement hydration, microstructure and mechanical strength