Abstract:It is proposed to use dredged marine sediments as fill material in marine reclamation engineering by stabilisation/solidification (S/S) technology with sustainable binding materials, which can help the soft soil gain strength to solve the engineering geological problem of its insufficient bearing capacity. In this work, lime and two types of industrial wastes, i.e., incinerated sewage sludge ash (ISSA) and ground granulated blast-furnace slag (GGBS), were selected as the binding materials. Hong Kong marine deposits (HKMD) slurry with a high initial water content of 110% was mixed with 30% binders (30% lime and 70% (ISSA+GGBS) with ISSA: GGBS = 3). The seawater (SW) with salinity of 3.6% was employed as mixing solution in S/S treatment of HKMD. To detect the effect of each main composition in SW on the performance of S/S HKMD, the pure solutions of NaCl, MgCl 2 and Na 2 SO 4 were adopted in this study. The results show that the use of SW in the lime-activated ISSA and GGBS treated dredged HKMD slurry is effective in improving its strength. The X-ray diffraction, thermo-gravimetric analysis and scanning electron microscopy observations present the formation of calcium/magnesium silicate hydrate (C/M-S-H), Friedel's salt and ettringite, which fill into the pores and interlock the particles in the mixture increasing the strength of the treated HKMD. The chemical compositions of SW have significant and different impacts on the performance of treated HKMD samples. Na + can help the samples gain higher strength and result in the cracking development in the S/S samples. Mg 2+ will lead to the formation of M-S-H, which reduces the porosity of treated HKMD samples. However, the contribution of M-S-H to the soil strength is less than that of C-S-H. Cl − in the mixture would slow down the reaction speed and show slight impacts on the modulus. SO 4 2− accelerates the reactions in the treated samples and has a more significant effect on nano-size porosity of bulk sample. Consequently, the seawater has positive effect on the S/S performance of HKMD slurry, suggesting potential application in the practical projects.

Characteristics of alkali-activated slag powder mixing with seawater: Workability, hydration reaction kinetics and mechanism

Preparation of Coal Gasification Coarse Slag-Based Alkaline Activator and Its Activation Mechanism in Alkali-Activated Slag

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

A comparison between alkali‐activated slag/fly ash binders prepared with natural seawater and deionized water

Hydration Characteristics of Slag-Ca(OH)2-Al2O3 Binder in a 60 °C Curing Environment with Brine as Mixing Water

Recent Advances in Alkali-Activated Materials with Seawater and Sea Sand

A novel admixture to improve durability of alkali-activated slag by reducing water sorptivity and optimising the process of activation

Effect of blended inorganic salts containing negative hydration ions on hydration and properties of alkali-activated slag cement

Effect of Seawater on Hydration and Sulfate Resistance of Noncement Mortars

Degradation of alkali-activated slag subjected to water immersion

Strength Development Mechanism Of A Marine Binding Material With Red Mud And Seawater

Effect of seawater on solidification/stabilisation treatment of marine soft soil slurry by lime-activated ISSA and GGBS

Fluidity, mechanical properties, shrinkage of alkali-activated slag/stainless steel slag mortars with composite activators

Alkali-activated slag mortar molded by non-stirring molding: Compressive strength, hydration properties and microstructures

Influence of seawater concentration on alkali-silica reaction of seawater sea-sand concrete: Mimicking through NaCl solution and recycled glass aggregate

Properties, Microstructure Development and Life Cycle Assessment of Alkali-Activated Materials Containing Steel Slag under Different Alkali Equivalents

Influence of Seawater and Sea Sand on the Performance of Anti-Washout Underwater Concrete: The Overlooked Significance of Mg2+

Study of seawater corrosion resistance of ordinary Portland cement–aluminate cement–gypsum mortar containing slag

Influences of aggregate gradation on alkali-silica reaction of seawater and sea sand concrete

Understanding the impact of main seawater ions and leaching on the chloride transport in alkali-activated slag and Portland cement

Durability properties of sustainable alkali-activated cementitious materials as marine engineering material: A review