A comparison between alkali‐activated slag/fly ash binders prepared with natural seawater and deionized water

Jie Ren,Hongfang Sun,Qun Li,Zhenming Li,Xiaogang Zhang,Yanshuai Wang,Linfei Li,Feng Xing
DOI: https://doi.org/10.1111/jace.18515
IF: 4.186
2022-04-25
Journal of the American Ceramic Society
Abstract:In this research, the effects of natural seawater on the properties of AASF are studied. AASF prepared with deionized water is set as the reference mixture. The results showed that the use of natural seawater resulted in a prolonged setting time and lower heat release, but no obvious impact on the flowability of AASF specimens. The long‐term compressive strength became higher when seawater was used, whereas the corresponding flexural strength and fractural toughness turned lower. The use of seawater induced the formation of new products that were not identified in the reference mixture, such as Cl‐hydrocalumite and gypsum. In addition, it is evidenced that the dissolution of fly ash particles was significantly delayed with the incorporation of seawater. All these results were related to the various ions introduced by the natural seawater and their interactions with the alkaline activator as well as the precipitation of salts on slag and fly ash surfaces or in the matrix.This article is protected by copyright. All rights reserved
materials science, ceramics
What problem does this paper attempt to address?