Abstract:A comprehensive three-dimensional model for an assembled button solid oxide fuel cell is developed by coupling thermal-electrochemical and mechanical models. Different mechanical effects including residual strain, thermal strain, accelerated and normal creep, mechanical properties change of anode, as well as chemical expansion are considered. The mechanical response of the button cell subjected to an idealized duty cycle from the as-fabricated state, heating-up stage, reduction stage, to three operation periods of 800 °C, 700 °C, and 600 °C is numerically simulated. Simulations are based on and validated by the experimental polarization curves and residual stress curve. Results show that the sealant is susceptible to fracture at the as-fabricated state, while the cathode is likely to fail during heating-up stage. The accelerated creep effect during reduction significantly eliminates the tensile stress in the anode nevertheless leads to higher stress in the cathode and electrolyte. It indicates that the assumption of zero-stress temperature at the reduction point could cause an underestimation of stress in the cathode and electrolyte in the case of a constrained cell. The chemical expansion effect in the cathode is more prominent at higher operating temperatures. A minimum failure probability of the cell is found at 700 °C with consideration of chemical expansion.

Time Dependent Failure Probability Estimation of the Solid Oxide Fuel Cell by a Creep-Damage Related Weibull Distribution Model

Study on creep damage and life prediction of the planar solid oxide fuel cell by modeling of multiphysics coupled

Effect of the Geometrical Size on Time Dependent Failure Probability of the Solid Oxide Fuel Cell

Effect of Temperature Fluctuation on Creep and Failure Probability for Planar Solid Oxide Fuel Cell

Long-term Evolution of Mechanical Performance of Solid Oxide Fuel Cell Stack and the Underlying Mechanism

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Effect of Operating Temperature on Creep and Damage in the Bonded Compliant Seal of Planar Solid Oxide Fuel Cell

High temperature creep strength design and optimization of solid oxide fuel cell

Thermo-Electro-Chemo-Mechanical Modeling of Solid Oxide Fuel Cell for Stress and Failure Evolution During Duty Cycle

Mismatch effect of material creep strength on creep damage and failure probability of planar solid oxide fuel cell

Investigation of creep damage and failure probability in solid oxide fuel cells with different flow channel geometries

Numerical Study on the Mechanical Stress and Mechanical Failure of Planar Solid Oxide Fuel Cell

Evolution of Thermal Stress and Failure Probability During Reduction and Re Oxidation of Solid Oxide Fuel Cell

Thermal Shock Resistance and Failure Probability Analysis on Solid Oxide Electrolyte Direct Flame Fuel Cells

Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Effect of Inhomogeneous Oxidation on the Mechanical Degradation of Anode Supported Solid Oxide Fuel Cell

Effect of Frame Material on the Creep of Solid Oxide Fuel Cell

Effects of a cooling channel on the creep damage and failure probability of planar solid oxide fuel cells

Online Identification of a Link Function Degradation Model for Solid Oxide Fuel Cells under Varying-Load Operation

Using Short-Time Creep Relaxation Effect to Decrease the Residual Stress in the Bonded Compliant Seal of Planar Solid Oxide Fuel Cell – A Finite Element Simulation