Abstract:Different micro-regions of weldment are expected to present various cyclic softening behaviours during creep-fatigue interaction (CFI), which has a significant influence on the remaining mechanical properties. The present work aims to investigate the cyclic softening and remaining creep behaviour of different micro-regions of P92 steel weldment using electron backscattered diffraction (EBSD) and nanoindentation technology. CFI tests were performed and interrupted at various pre-set fatigue cycles at elevated temperature of 650 degrees C and hold time of 180 s, and thereafter EBSD analyses, nanoindentation tests and high-temperature creep tests were conducted on these interrupted specimens. Experimental results reveal that the microstructure of the parent metal and fine austenite grain heat-affected zone, which is adjacent to the intercritical heat affected zone, are sensitive to CFI loading. Notably, the microstructural evolution in intercritical heat affected zone almost reaches saturated after fatigue cycles of 20%Nf. Nanoindentation results uncover that the intercritical heat affected zone exhibits the lowest elastic modulus and micro hardness, and with increasing the number of fatigue cycles, the weakest region changes. Accordingly, creep fracture location transits and creep life was degraded. Finally, a fatigue damage parameter based on the microhardness was developed to capture the effects of CFI on remaining creep life. (c) 2021 Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Effect of Frame Material on the Creep of Solid Oxide Fuel Cell

Mismatch effect of material creep strength on creep damage and failure probability of planar solid oxide fuel cell

Study on creep damage and life prediction of the planar solid oxide fuel cell by modeling of multiphysics coupled

High temperature creep strength design and optimization of solid oxide fuel cell

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Investigation of creep damage and failure probability in solid oxide fuel cells with different flow channel geometries

Effects of a cooling channel on the creep damage and failure probability of planar solid oxide fuel cells

Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack

Finite element modeling of creep behavior of porous nickel alloys at the operating conditions of molten carbonate fuel cell

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

Fatigue-Creep Interaction Of P92 Steel And Modified Constitutive Modelling For Simulation Of The Responses

Evaluation of the Effect of Various Prior Creep-Fatigue Interaction Damages on Subsequent Tensile and Creep Properties of 9%cr Steel

Influence of Prior Low Cycle Fatigue on Microstructure Evolution and Subsequent Creep Behavior

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Effect of holding time in brazing cooling process on creep life of the solid oxide fuel cell with bonded compliant seal

Thermal Creep Effects of Aluminum Alloy Cladding on the Irradiation-Induced Mechanical Behavior in U–10Mo/Al Monolithic Fuel Plates

An improved life prediction strategy at elevated temperature based on pure creep and fatigue data: Classical strain controlled and hybrid stress-strain controlled creep-fatigue test