Abstract:Solid Oxide Fuel Cell (SOFC) is a developing energy conversion technology featuring high efficiency, power density, durability, and fuel compatibility. With these advantages, SOFCs are combined frequently with heat engines such as gas turbines, for higher system efficiency and power density. In practice, SOFCs are often required to deliver certain power. Considering economical aspects, power generation efficiency is critical to the running cost of energy conversion systems. However, high power and high efficiency are likely reached under different operating conditions. For example, to meet peak power demands, higher operating currents and fuel flowrates are necessary, while SOFCs are generally more energy efficient at lower current densities and fuel flowrates. Hence, the ideal operating condition is the solution to a power-constrained efficiency optimization problem. Moreover, SOFCs degrade as they operate, introducing gradual changes to SOFC characteristics. Thus, the optimization needs to be solved dynamically. To analyze the above-mentioned problem, a 10 cm by 10 cm planar SOFC was repeatedly tested for polarization characterizations and electrochemical impedance spectra. A 2-dimentional multi-physics model was developed and calibrated using both polarization and impedance data. To account for the lower open circuit voltage at lower fuel flowrates, an equivalent leakage current is included in the model. The model was thereafter employed for efficiency optimization given power constraints. At each required power output, the optimal fuel flowrate and the corresponding voltage, current, and efficiency was calculated. The electrical efficiency peaks globally at around 0.1 Standard Liter per Minute (SLM) hydrogen flowrate, while at higher power, the optimal efficiency is reached at fuel utilizations between 65% and 90%. Accounting for degradation in terms of growing ohmic resistance and decreasing electrode exchange current densities, the optimal efficiency is reached at lowering fuel utilization and lowering voltage, which may result in local oxidization of the anode. Moreover, an easy and straight-forward way was proposed to estimate the optimal fuel flowrate given polarization data. Further studies involving the safety constraints will be carried out in the future. Figure 1

Online Identification of a Link Function Degradation Model for Solid Oxide Fuel Cells under Varying-Load Operation

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Performance Degradation Analysis and Fault Prognostics of Solid Oxide Fuel Cells Using the Data-Driven Method

A Prognostic-Based Dynamic Optimization Strategy for a Degraded Solid Oxide Fuel Cell

Novel Hybrid Modeling and Analysis Method for Steam Reforming Solid Oxide Fuel Cell System Multifault Degradation Fusion Assessment

Performance Degradation Analysis of Solid Oxide Fuel Cells Using Dynamic Electrochemical Impedance Spectroscopy

Prediction Study of Solid Oxide Fuel Cell Performance Degradation Using Data‐Driven Approaches

Discharge Performance Recovery of a Solid Oxide Fuel Cell Based on a Prognostic-Based Control Strategy

Electrochemical Model of Solid Oxide Fuel Cell for Simulation at the Stack Scale I. Calibration Procedure on Experimental Data

Estimating the Remaining Useful Life of Proton Exchange Membrane Fuel Cells under Variable Loading Conditions Online

Degradation identification and prognostics of proton exchange membrane fuel cell under dynamic load

Time Dependent Failure Probability Estimation of the Solid Oxide Fuel Cell by a Creep-Damage Related Weibull Distribution Model

Multiscale modeling of degradation of full solid oxide fuel cell stacks

Identification of the coupling functions between the process and the degradation dynamics by means of the variational Bayesian inference: an application to the solid-oxide fuel cells

Efficiency Optimization of SOFC Subject to Degradation and Minimum Power Constraint

Test and Modelling of Solid Oxide Fuel Cell Durability: A Focus on Interconnect Role on Global Degradation

Prediction of Fuel Cell Performance Degradation Using a Combined Approach of Machine Learning and Impedance Spectroscopy

A Durability Model for Solid Oxide Fuel Cell Electrodes in Thermal Cycle Processes

Study on Model Evolution Method Based on the Hybrid Modeling Technology with Support Vector Machine for an SOFC-GT System

A Comparative Study of the Kalman Filter and the LSTM Network for the Remaining Useful Life Prediction of SOFC

Operating limitation and degradation modeling of micro solid oxide fuel cell-combined heat and power system