Abstract:Solid Oxide Fuel Cell (SOFC) is a developing energy conversion technology featuring high efficiency, power density, durability, and fuel compatibility. With these advantages, SOFCs are combined frequently with heat engines such as gas turbines, for higher system efficiency and power density. In practice, SOFCs are often required to deliver certain power. Considering economical aspects, power generation efficiency is critical to the running cost of energy conversion systems. However, high power and high efficiency are likely reached under different operating conditions. For example, to meet peak power demands, higher operating currents and fuel flowrates are necessary, while SOFCs are generally more energy efficient at lower current densities and fuel flowrates. Hence, the ideal operating condition is the solution to a power-constrained efficiency optimization problem. Moreover, SOFCs degrade as they operate, introducing gradual changes to SOFC characteristics. Thus, the optimization needs to be solved dynamically. To analyze the above-mentioned problem, a 10 cm by 10 cm planar SOFC was repeatedly tested for polarization characterizations and electrochemical impedance spectra. A 2-dimentional multi-physics model was developed and calibrated using both polarization and impedance data. To account for the lower open circuit voltage at lower fuel flowrates, an equivalent leakage current is included in the model. The model was thereafter employed for efficiency optimization given power constraints. At each required power output, the optimal fuel flowrate and the corresponding voltage, current, and efficiency was calculated. The electrical efficiency peaks globally at around 0.1 Standard Liter per Minute (SLM) hydrogen flowrate, while at higher power, the optimal efficiency is reached at fuel utilizations between 65% and 90%. Accounting for degradation in terms of growing ohmic resistance and decreasing electrode exchange current densities, the optimal efficiency is reached at lowering fuel utilization and lowering voltage, which may result in local oxidization of the anode. Moreover, an easy and straight-forward way was proposed to estimate the optimal fuel flowrate given polarization data. Further studies involving the safety constraints will be carried out in the future. Figure 1

Operating limitation and degradation modeling of micro solid oxide fuel cell-combined heat and power system

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Efficiency Optimization of SOFC Subject to Degradation and Minimum Power Constraint

Study on the Operating Parameters of the 10 Kw SOFC-CHP System with Syngas

Optimization of a 30 Kw SOFC Combined Heat and Power System with Different Cycles and Hydrocarbon Fuels

Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack

Analysis of a biogas-fed SOFC CHP system based on multi-scale hierarchical modeling

Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Degradation behavior under alternating constant-current/constant-voltage discharge for flat-tube solid oxide fuel cells inside stack

Comparison and Analysis of kW-Class SOFC-CHP Systems with Different Fuels

Electrochemical Model of Solid Oxide Fuel Cell for Simulation at the Stack Scale I. Calibration Procedure on Experimental Data

Multiscale modeling of degradation of full solid oxide fuel cell stacks

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

Performance Degradation Analysis of Solid Oxide Fuel Cells Using Dynamic Electrochemical Impedance Spectroscopy

SOFC-GT Hybrid System Simulation Using a Distributed-Parameter SOFC Model

Parametric study of kW-class solid oxide fuel cell stacks fueled by hydrogen and methane with fully multiphysical coupling model

Performance Analysis of SOFC/micro-GT Hybrid System

Energy and Parameter Analysis of SOFC System for Hydrogen Production from Methane Steam Reforming

Thermodynamic investigation of an integrated near-zero CO2 emission power generation system with SOFC, MGT, SCO2BC, and CO2 capture