Abstract:In recent years, the Vernier effect has received much attention from researchers in the field of fiber sensing because of its ability to improve measurement sensitivity significantly. However, two prominent problems occur when it is used for strain sensing: low extinction ratio (ER) and high-temperature cross-sensitivity. A compact fiber strain sensor based on the Vernier effect with the advantages of high strain sensitivity, high ER, and low-temperature cross-sensitivity is proposed in this study. The sensing Fabry–Perot interferometer (SFPI) utilizes a hollow-core fiber (HCF) as the FP cavity. HCF can effectively confine the light beam and increase the ER of the interference fringes. Moreover, the second reflecting surface of SFPI is implemented using an indirect fusion method, which increases the active length to improve strain sensitivity. A reference Fabry–Perot interferometer (RFPI) is inserted into a hollow silica capillary (HSC) to isolate it from external environmental effects while serving as one of the reflecting surfaces for SFPI. The factors influencing the strain sensitivity of the sensor are analyzed through theoretical and experimental analyses. The maximum strain sensitivity is , and its temperature sensitivity is only . This sensor also exhibits excellent stability and reversibility. It also has potential applications in the field of strain sensing.

Sensitivity-enhanced Fiber Strain Sensing System Based on Microwave Frequency Scanning with the Vernier Effect

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

High-Sensitivity Microfiber Strain and Force Sensors

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

High-Resolution Sensing System Based on Fiber Bragg Grating Fabry–Perot Interferometer and Frequency-Domain Demodulation

Large detection range and high strain sensitivity fiber SPR sensor based on wave structure

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

Simulation of Optical Microfiber Strain Sensors Based on Four-Wave Mixing

Sensitivity enhanced temperature and strain sensor based on parallel hybrid interferometers and the Vernier effect

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

High Sensitivity Fiber-Optic Strain Sensor Based on Modified Microfiber-Assisted Open-Cavity Mach-Zehnder Interferometer

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

Fiber-optic sensors based on Vernier effect

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

Quasi-distributed frequency-modulated continuous-wave reflectometric optical fiber strain sensor

All-Fiber Strain Sensor Based on Dual Side V-Grooved Long-Period Fiber Grating

Fiber tension sensor using microwave as subcarrier

Temperature and Strain Sensor Based on a Few-Mode Photonic Crystal Fiber

Photonic crystal fiber strain sensor based on multimode/air spherical cavity structure