Abstract:An ultrahigh sensitivity sensor for temperature and strain measurement based on Solc-Sagnac interferometer is demonstrated, which is fabricated by fusing two segments of polarization maintaining fiber (PMF) with a rotation angle. As the lengths of the two PMFs are close to each other, a vernier effect is generated. Through theoretical and simulation analysis, it is found that as the fusion angle is 90°, the envelope can be eliminated and the waveform similar to that of ordinary single-ring Sagnac interferometer is realized. The longer PMF serves as the sensing part, and the changes in temperature and strain cause variations in the birefringence of the sensing fiber which leads to the shift of the interference signal. Three sets of temperature sensing experiments are carried out to demonstrate the influences of the length parameters of the two PMFs on the sensitivity. We find the temperature sensitivities are 16.9, 32.6, and 43.8 nm/°C, respectively, which is improved by 11.3, 21.9, and 29.4 times compared to the ordinary single-ring Sagnac interferometer. Meanwhile, the optimal fiber structure is used for strain sensing experiments whose sensitivity is 785 pm/ $\mu \varepsilon $ which increases by 28.8 times compared with ordinary single-loop interferometer. Then, the dual parameter measurement of temperature and strain is realized by using coefficient matrix. From the experimental results, it can be seen that the fiber structure with a fusion angle of 90° has the vernier effect to achieve the amplification of sensitivity and the corresponding interferometer possesses the advantages of easy demodulation and high accuracy due to the simple waveform.

Sensitivity enhanced temperature and strain sensor based on parallel hybrid interferometers and the Vernier effect

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Ultrasensitive Temperature and Strain Sensor Based on a Hybrid Fiber Interferometer With the Vernier Effect

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

Highly sensitive fiber-optic temperature sensor with compact hybrid interferometers enhanced by the harmonic Vernier effect

Hybrid Interferometer Sensor Based on the Enhanced Vernier Effect for the Simultaneous Measurement of Strain and Temperature

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

A Highly Sensitive Temperature and Strain Sensor Based on Fiber Lyot Filter with Vernier Effect

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Experimental study on a parallel optical fiber Sagnac loops-based sensor with the advantages of both high sensitivity and ultra-wide measurement range

Ultra-high Sensitivity Sensor for Temperature and Strain Measurement Based on Solc-Sagnac Interferometer

Sensitivity-Enhanced Fiber Temperature Sensor Based on Vernier Effect and Dual In-Line Mach–Zehnder Interferometers

Ultra-sensitive strain sensor composed of tapered two-mode fiber micro-cantilever inserted into quartz capillary

Paralleled Sagnac Interferometer and Mach–Zehnder Interferometer for Enhanced Measurements Sensitivity Based on Vernier Effect

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

High-sensitivity fiber optic temperature sensor based on enhanced vernier effect

Design of a Nested Hollow-Core Anti-Resonant Fiber Sensor for Simultaneous Measurement of Temperature and Strain

High-sensitivity Transverse-Load and High-Temperature Sensor Based on the Cascaded Vernier Effect

Interferometric Fiber Optic Surface Plasmon Resonance Sensor for Temperature and Strain Measurement

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber