Abstract:Fiber-optic temperature sensors have gained much attention owing to their intrinsic features of light weight, immunity to electromagnetic interference, and capability for distributed measurement. Especially, temperature sensors based on Fabry-Perot interferometers (FPIs) are attractive owing to their advantages of compact size and convenient reflection measurement. However, due to the low thermal expansion or/and thermo-optic coefficient of fiber, the temperature sensitivities of these sensors are normally low (similar to 10 pm/degrees C or even lower). In order to improve the temperature sensitivity, a device with dual cascaded FPIs is proposed and demonstrated in this paper, which works on vernier effect and exhibits a much higher temperature sensitivity. The device is fabricated by splicing a short segment of large mode area (LMA) fiber to a short segment of capillary tube fused with a section of single-mode fiber to form an extrinsic Fabry-Perot interferometer with a glass cavity cascaded to an intrinsic FPI with a narrow air cavity. By setting the lengths of capillary tube and LMA fiber to allow similar free spectral ranges to be obtained, and superimposing of the reflection spectra of the two FPIs, the vernier effect can be generated. Firstly, the principle of temperature sensing based on vernier effect of this device is analyzed and simulated theoretically, and it is found that the temperature sensitivity can be improved significantly by using vernier effect compared with that of a single FPI with an air-cavity or glass cavity by directly tracing resonant dips/peaks. Then, the temperature responses of the FPI with single air-cavity and dual cascaded cavities are measured, respectively. Experimental results match well with the theoretical analysis carried out. The temperature sensitivity of the proposed sensor is improved greatly from 0.71 pm/degrees C for a single FPI sensor with an air-cavity to 179.30 pm/degrees C by employing the vernier effect. Additionally, the sensor exhibits good repeatability in a temperature range of 100-500. C. The proposed sensor has the advantages of compact size ( < 1 mm in dimension) and high sensitivity, which makes it promising for temperature sensing in a variety of industries, such as food inspection, pharmacy, oil/gas exploration, environment, and high-voltage power systems.

Highly sensitive fiber-optic temperature sensor with compact hybrid interferometers enhanced by the harmonic Vernier effect

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Sensitivity enhanced temperature and strain sensor based on parallel hybrid interferometers and the Vernier effect

Ultrasensitive Temperature and Strain Sensor Based on a Hybrid Fiber Interferometer With the Vernier Effect

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

High-sensitivity fiber optic temperature sensor based on enhanced vernier effect

High-sensitivity Transverse-Load and High-Temperature Sensor Based on the Cascaded Vernier Effect

Experimental Study of Fiber-Optic Temperature Sensor Based on Dual FSIs

Ultrasensitive Temperature Sensor with Vernier-effect Improved Fiber Michelson Interferometer.

Fiber optic temperature sensor based on harmonic Vernier effect generated by cascaded SI and FPI

Fiber Optic Temperature Sensor With Online Controllable Sensitivity Based on Vernier Effect

Hybrid Interferometer Sensor Based on the Enhanced Vernier Effect for the Simultaneous Measurement of Strain and Temperature

Highly Sensitive and Regulatable Optical Fiber Vernier Sensor Based on Two Integrated Parallel MZIs

Highly sensitive fiber-optic inclinometer utilizing a polymer waveguide-embedded interferometric sensor

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

Sensitivity-Enhanced Fiber Temperature Sensor Based on Vernier Effect and Dual In-Line Mach–Zehnder Interferometers

Highly Sensitive Temperature Sensor Based on Vernier Effect Using a Sturdy Double-cavity Fiber Fabry-Perot Interferometer

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Highly Sensitive Optical Fiber Temperature Sensor Based on Microwave Photonic Filter With Enhanced Vernier Effect

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

Sensitivity-enhanced temperature sensor with fiber optic Fabry-Perot interferometer based on vernier effect