Abstract:Semiconductor manufacturing depends on the development of new processes, advanced patterning, and novel materials to create smaller and higher performing devices to follow the industry roadmaps for applications for computing and systems (such as smartphones and servers). For dynamic random access memory (DRAM) applications, the biggest efforts are engaged in scaling and shrinking of the nodes, and these then affect the area density, performance, and cost of the DRAM cells. However, while we are reaching a slowdown in dimension-scaling, more innovation is needed to sustain the high aspect ratios required in the capacitor’s architecture—whether it is moving toward 3D architectures or developing new materials to sustain the challenge of scaling. To accelerate the learning, it is essential to screen novel hard mask (HM) materials in a rapid fashion to speed their development. While EUV (extreme ultraviolet—a wavelength of 13.5 nm) lithography requires 300 mm wafers, electron beam lithography (EBL) generates nanoscale patterns in a maskless manner on smaller substrates (from 300 mm wafers to 10 mm2 coupons) mimicking sub-50 nm EUV features. The primary goal of this work is to create a path for rapid screening of HM materials that are still under early phase development and which are prepared in small chamber tools (coupon chambers) and, therefore, not ready for 300 mm process integration. While the features investigated of 44 nm half pitch seem extremely reasonable for e-beam, the requirements and the approaches used to address the needed patterned area, resolution, speed, and uniformity exceed the standard conditions previously reported in the literature. Each aspect will be evaluated in the context of a “dots on the fly,” or DOTF, patterning technique.

Lithography Process Optimization for Emitter Window in Sige-Hbt Device

A composite algorithm of lithography process in AlGaN/GaN-on-SiC HEMTs manufacturing

Lithography Solutions in Novel High Frequency Sige Hbt Device

Immersion Barc for Hyper Na Applications Ii

Laser Direct Writing System and Its Lithography Properties

Optimization of Polysilicon Gate Etching Process in SONOS Memory Fabrication

Compact Ultraviolet Light-Emitting Diode-Based Lithography Illumination System with Tunable Coherent Factor

Effective Optimization Strategy for Electron Beam Lithography of Molecular Glass Negative Photoresist

Optimization of Spatial Dose Distribution for Controlling Sidewall Shape in Electron-beam Lithography

Process Window, and Process Optimization in Both Low and High Na EUV Processes for Advanced Logic Technologies Nodes

Process Optimization of Optical Lithography of SU-8 Photoresist

Process optimization of contact hole patterns via a simulated annealing algorithm in extreme ultraviolet lithography

Lithography Process for KrF in the Sub-0.11 Μm Node

Considerations in the Setting Up of Industry Standards for Photolithography Process, Historical Perspectives, Methodologies, and Outlook

Emitter-base short issue study and improvement in a low cost and high performance 0.18um SiGe BiCMOS process

Fabrication of Sub-10 Nm Gap by Using Electron Beam Lithography

Rapid prototyping of etch test structures for hard mask development using electron beam lithography

The Discussion of the Typical BEOL Design Rules from 3 Nm to 2 Nm Logic Process with EUV and High NA EUV Lithography

The Application of Optical Resolution Enhancement Technology and E-Beam Direct Writing Technology in Microfabrication

A strategy to fabricate nanostructures with sub-nanometer line edge roughness

Total Solutions for 40nm Metal Hard-Mask All-In-One Etch Process