Abstract:Poly(3-hexylthiophene) (P3HT):polystyrene (PS) blends prepared from different solvents were used as the semiconducting layers in organic field-effect transistors (OFETs). The relationship between the molecular arrangement, aggregation and charge transport in P3HT:PS blends with the boil-points and solubility of different solvents were systematically analyzed. Topographic investigation by atomic force microscopy carried out on blends with various solvents revealed a lateral phase separation of the two components, which was strongly influenced by the choice of solvent. Although the blend film was highly disordered, the OFETs performed as well as that with the pristine P3HT films. Moreover, 1,2-dichlorobenzene with the high boiling temperature was found to be more desirable for achieving distinct lateral aggregation of P3HT in the blend film, which led to the superior performance of the OFET. X-ray diffraction analyses and optical absorption measurements revealed that PS matrix made the arrangement of P3HT molecules more disordered, but introduced a more efficient intermolecular coupling of P3HT molecules. This could be ascribed to that, the PS matrix made the aggregating rates of the P3HT molecules slower, inducing a uniform distribution of P3HT molecules in the blend film. This was beneficial for the efficient charge transport in the blend film, which provided a pathway between the aggregations and acted as a tie-molecule in the blend film. Consequently, the field-effect mobility of the optimized OFET (1.6 wt% P3HT) increased three times and the current on/off ratio increased two times compared to that of the pure P3HT (8 wt%). This work will fill the gap of current research about semiconductor/insulator blend transistor. (C) 2015 Elsevier B.V. All rights reserved.

Organic-semiconductor: Polymer-electret Blends for High-Performance Transistors

A Transfer Method for High‐Mobility, Bias‐Stable, and Flexible Organic Field‐Effect Transistors

Dopant/Semiconductor/Electret Trilayer Architecture for High‐Performance Organic Field‐Effect Transistors

Polymer Electret Improves the Performance of the Oxygen-Doped Organic Field-Effect Transistors

Wettability Control of Interfaces for High-Performance Organic Thin-Film Transistors by Soluble Insulating Polymer Films.

Mixing Insulating Commodity Polymers with Semiconducting n‐type Polymers Enables high‐Performance Electrochemical Transistors

Polymer Electrolyte Blend Gate Dielectrics for High-Performance Ultrathin Organic Transistors: Toward Favorable Polymer Blend Miscibility and Reliability

Controllable Thin-Film Morphology and Structure for 2,7-Dioctyl[1]benzothieno[3,2-b][1]benzothiophene (c8btbt) Based Organic Field-Effect Transistors

Enhancing the Performance of Solution-Processed Organic Thin-Film Transistors by Blending Binary Compatible Small Molecule Semiconductors

Solvent-dependent Electrical Properties Improvement of Organic Field-Effect Transistor Based on Disordered Conjugated Polymer/insulator Blends

Blending Crystalline/liquid Crystalline Small Molecule Semiconductors: A Strategy Towards High Performance Organic Thin Film Transistors

Solution-processed Organic Field-Effect Transistors with Cross-Linked Poly(4-Vinylphenol)/polyvinyl Alcohol Bilayer Dielectrics

Small Molecule: Polymer Blends for N‐type Organic Thin Film Transistors via Bar‐coating in Air

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

Manipulating Transistor Operation Via Nonuniformly Distributed Charges in A Polymer Insulating Electret Layer

Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors

Polysiloxane-Poly(Vinyl Alcohol) Composite Dielectrics For High-Efficiency Low Voltage Organic Thin Film Transistors

Improving Device Performance of n-type Organic Field-Effect Transistors via Doping with p-type Organic Semiconductor

Air-Stable Ambipolar Organic Field Effect Transistors with Heterojunction of Pentacene and N,N '-Bis(4-trifluoromethylben-zyl) Perylene-3,4,9,10-Tetracarboxylic Diimide

Transparent polymer nanoheterostructure films for flexible low-power organic transistors with high mobility, decent photostability, and ultralong-term air stability

Interface Engineering of Semiconductor/Dielectric Heterojunctions Toward Functional Organic Thin-Film Transistors