Abstract:Organic field‐effect transistors (OFETs) based on two‐dimensional (2D) monolayer organic semiconductors (OSC) have demonstrated promising potentials for various applications, such as light emitting diode (LED) display drivers, logic circuits, and wearable electrocardiography (ECG) sensors. To date, the fabrications of this class of highly crystallized 2D organic semiconductors (OSC) are dominated by solution shearing. As these organic active layers are only a few molecular layers thick, their compatibilities with conventional thermal evaporated top electrodes or sophisticated photolithography patterning are very limited, which also restricts their device density. Here, we develop an electrode transfer stamp and a semiconductor patterning stamp to fabricate OFETs with channel lengths down to 3 μm over a large area without using any chemicals or causing any damage to the active layer. Two‐dimensional (2D) 2,9‐didecyldinaphtho[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (C10‐DNTT) monolayer OFETs developed by this new approach shows decent performance properties with a low threshold voltage (VTH) less than 0.5 V, intrinsic mobility higher than 10 cm2 V−1 s−1 and a subthreshold swing (SS) less than 100 mV dec−1. The proposed patterning approach is completely comparable with ultra‐flexible parylene substrate less than 2 μm thick. By further reducing the channel length down to 2 μm and using the monolayer OFET in an AC/DC rectifying circuit, the measured cutoff frequency is up to 17.3 MHz with an input voltage of 4 V. The newly proposed electrode transfer and patterning stamps have addressed the long‐lasting compatibility problem of depositing electrodes onto 2D organic monolayer and the semiconductor patterning. It opens a new path to reduce the fabrication cost and simplify the manufacturing process of high‐density OFETs for more advanced electronic or biomedical applications. This article is protected by copyright. All rights reserved

Dopant/Semiconductor/Electret Trilayer Architecture for High‐Performance Organic Field‐Effect Transistors

Polymer Electret Improves the Performance of the Oxygen-Doped Organic Field-Effect Transistors

Organic-semiconductor: Polymer-electret Blends for High-Performance Transistors

Modulation Doping for Threshold Voltage Control in Organic Field-Effect Transistors

Anion Bulk Doping of Organic Single‐Crystalline Thin Films for Performance Enhancement of Organic Field‐Effect Transistors

Manipulating Doping of Organic Semiconductors by Reactive Oxygen for Field-Effect Transistors

Solution-processed Organic Field-Effect Transistors with Cross-Linked Poly(4-Vinylphenol)/polyvinyl Alcohol Bilayer Dielectrics

2D Molecular Crystal Bilayer P-N Junctions: A General Route Toward High-Performance and Well-Balanced Ambipolar Organic Field-Effect Transistors

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping

Liquid Crystal-Like Active Layer for High-Performance Organic Field-Effect Transistors

Organic Charge‐Transfer Complex based Microstructure Interfaces for Solution‐Processable Organic Thin‐Film Transistors toward Multifunctional Sensing

Interlayers for Improved Hole Injection in Organic Field‐Effect Transistors

High-Performance Organic Field-Effect Transistors with Dielectric and Active Layers Printed Sequentially by Ultrasonic Spraying

Diketopyrrolopyrrole Based Organic Semiconductor Materials for Field-Effect Transistors

Enhanced Performance of Organic Field-Effect Transistors by a Molecular Dopant with High Electron Affinity.

Reduced contact resistance in top-contact organic field-effect transistors by interface contact doping

Synergistic Effect of Solvent Vapor Annealing and Chemical Doping for Achieving High-Performance Organic Field-Effect Transistors with Ideal Electrical Characteristics

Low-power High-Mobility Organic Single-Crystal Field-Effect Transistor

Pursuing High‐Performance Organic Field‐Effect Transistors through Organic Salt Doping

Light-assisted charge injection and depletion of insulator electrets for organic field-effect transistors

Semiconductor/dielectric Interface in Organic Field-Effect Transistors: Charge Transport, Interfacial Effects, and Perspectives with 2D Molecular Crystals